• Biotechnology: environmental biotechnology, microbes that clean and recover

What is bioremediation?

Written with AI (How we create content)Target level: Grade 12Last updated: Report an error
Quick answer

Bioremediation is the use of living things, mostly bacteria and fungi, to clean up pollution in soil, water or air. Many microbes can use pollutants such as oil as food, breaking them down into carbon dioxide, water and new cells. Engineers speed this up by adding nutrients and oxygen or by adding chosen microbes. It is cheap and gentle, but slow, and it cannot destroy metals.

The topic explained

Microbes that eat pollution

Bioremediation is any process that uses a living system to remove pollutants from soil, water or air. Its workers are mostly bacteria and fungi. Many pollutants, such as the hydrocarbons in oil and fuel, are made of carbon and hydrogen, just like the sugars and fats microbes usually eat. Some microbes can use them as a source of carbon and energy, and with oxygen they break them down, in the end, into carbon dioxide, water and more microbial cells.

A good example is the marine bacterium Alcanivorax borkumensis. In clean seawater it is rare. After an oil spill it multiplies and becomes one of the main bacteria in the water, because it uses alkanes, a major part of oil, as its food. A common misreading is that bioremediation makes pollutants disappear in any form. Metals cannot be broken down at all: microbes can only change their chemical form or lock them in place. And many pesticides were designed to resist breakdown.

Three boxes joined by arrows: oil and oxygen, then microbes, then carbon dioxide and water; the microbes also grow new cells.oil + oxygenmicrobesCO2 + water
In outline, the aerobic breakdown of oil by microbes, which also grow new cells from it.

What limits the microbes, and how to help

Microbes able to eat a pollutant are often already present, but something holds them back. Oil is rich in carbon but poor in nitrogen and phosphorus, which cells need to grow; Alcanivorax, for example, takes over oily seawater when nitrogen and phosphorus are added. Oxygen is another limit, because it dissolves poorly in water and is used up fast in soil. Temperature, moisture and pH matter too.

Engineers help in two main ways. In biostimulation they add what is missing, nutrients, oxygen or water, so the microbes already on site grow faster. In bioaugmentation they add a culture of chosen microbes known to break down the pollutant, useful when the right microbes are absent. Students often assume adding microbes is always the stronger choice. Added microbes must compete with local ones in a place they are not adapted to, so biostimulation is often tried first.

A table comparing biostimulation and bioaugmentation: biostimulation adds nutrients and oxygen and relies on the microbes already there, for example nitrogen and phosphorus on an oil spill; bioaugmentation adds chosen microbes and relies on the added culture, for example a culture that breaks down a particular solvent.BiostimulationBioaugmentationaddsnutrients, oxygenchosen microbesrelies onlocal microbesadded cultureexampleN and P on oilsolvent eaters
Two ways to speed up the microbes.

In place or dug up

Treatment in situ, in place, leaves the soil where it is: in bioventing, air is drawn through the soil to feed microbes above the water table, and in biosparging air is injected below it. Treatment ex situ first digs up the soil: in landfarming it is spread in a thin layer and turned over now and then to let air in, and in biopiles it is heaped up with pipes that blow air through. Dug-up soil is easier to control, but digging costs money and disturbs the site. The 1989 Exxon Valdez spill, about 41,000 cubic meters of oil in Alaska, taught a lesson: washing beaches with hot water under high pressure also killed microbes that help break oil down.

A table comparing in situ and ex situ treatment: in situ treats the soil in place, for example by bioventing, for large and deep areas; ex situ digs the soil up, for example for landfarming, for small hot spots.In situEx situwherein placesoil dug upmethodsbioventinglandfarmingforlarge, deep areassmall, hot spots
Treating soil where it lies, or after digging it up.

Slow and steady: a worked example

The main weakness of bioremediation is speed. Suppose, in a made-up example, soil holds 5,000 mg of hydrocarbons per kg and must reach 500. If breakdown halves the amount every fixed time, the half-life, the soil needs log⁡210≈3.32\log_2 10 \approx 3.32 half-lives. With help the half-life might be 30 days, about 100 days in all; left alone at 120 days, about 400 days. That is why bioremediation suits sites where time is available, and why progress must be measured by sampling, not assumed. Real curves are rarely this neat. The lighter parts of oil usually break down first, while heavy, tar-like parts last much longer, so the fall often slows near the end, and some residue may stay locked in the soil, out of the microbes' reach.

Two falling curves of hydrocarbons in soil, starting at 5,000 milligrams per kilogram: with a half-life of 30 days the curve reaches the target of 500 after 100 days; with a half-life of 120 days it is still near 3,000 at 90 days.daysmg per kg255075100125150175100020003000400050000target 500100
A made-up example; the dot marks day 100. Steeper curve: helped, half-life 30 days; gentler curve: natural, 120 days.
Free printable worksheet

Practice: what is bioremediation?

For 12th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: what is bioremediation?Name:
  1. Define bioremediation and name the two main groups of organisms that carry it out.

  2. Fill in the products of the aerobic breakdown of oil.

    The three boxes of oil breakdown with the products replaced by a question mark.oil + oxygenmicrobes?
  3. Fill in what each method adds, and say which method relies on the microbes already on site.

    The table of biostimulation and bioaugmentation with what each one adds hidden.BiostimulationBioaugmentationadds??relies onlocal microbesadded cultureexampleN and P on oilsolvent eaters
  4. Why does adding nitrogen and phosphorus help bacteria break down an oil spill?

  5. Read the day on which the helped curve reaches 500 mg per kg, and explain the calculation.

    The two decay curves with the day on which the helped curve reaches the target replaced by a question mark.daysmg per kg255075100125150175100020003000400050000target 500?
    Steeper curve: half-life 30 days; gentler curve: half-life 120 days.
  6. In the same made-up example, how much hydrocarbon is left after 60 days with a 30-day half-life?

  7. A soil is polluted with lead. Can bioremediation remove the lead? Explain.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What are examples of bioremediation?

Adding nitrogen and phosphorus to oiled shorelines so oil-eating bacteria grow, landfarming fuel-polluted soil, blowing air through polluted soil in bioventing, and using plants to take up pollutants, called phytoremediation.

Is bioremediation better than digging the soil up and burning or burying it?

It is usually cheaper and gentler and leaves harmless products, but it is slow, works only on pollutants microbes can break down, and needs monitoring. The choice depends on the pollutant, the site and the time available.

What is the difference between in situ and ex situ bioremediation?

In situ treats the pollution where it lies, for example by blowing air through the soil. Ex situ first digs the soil up and treats it elsewhere, for example by landfarming or in biopiles.

Can bioremediation clean up heavy metals?

Not by breaking them down: metals cannot be degraded. Microbes can change a metal's chemical form, making it less mobile or less toxic, and some plants can take metals up so they can be harvested.

Why is bioremediation slow?

Microbes need the right conditions, oxygen, nitrogen, phosphorus, water and temperature, and the pollutant must be reachable. The process often takes months to years, which is its main drawback.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.