• Biotechnology: environmental biotechnology, microbes that clean and recover

What is bioleaching?

Written with AI (How we create content)Target level: Grade 12Last updated: Report an error
Quick answer

Bioleaching is the use of microbes to dissolve metals, mainly copper, out of ore. Acid-loving bacteria such as Acidithiobacillus ferrooxidans get their energy by oxidizing iron and sulfur. The ferric iron they make attacks sulfide minerals and releases the metal into an acid solution, which is collected and the metal recovered. It makes low-grade ore worth mining, but it is slow and must be kept from leaking.

The topic explained

Bacteria that help mine metals

Bioleaching is one form of biomining, the use of living things to extract metals from ores. Most copper ores are sulfide minerals, copper bound to sulfur, and in many deposits the metal is spread thinly through a lot of rock. Certain bacteria living in acid can help dissolve the metal out, so it can be collected from the liquid that drains from the rock.

People benefited from this long before they understood it: copper was recovered from the water draining old mine workings more than 300 years ago. Only in 1951 did Temple and Colmer describe Acidithiobacillus ferrooxidans as a bacterium that oxidizes iron, and industrial bioleaching began in the 1960s, with early copper projects in Chile. A common misreading is that the bacteria eat the copper. They do not use the copper at all: they eat iron and sulfur, and the copper is set free on the side.

Why use bacteria at all? Smelting low-grade ore would mean crushing and heating huge amounts of rock that holds almost no metal. The bacteria work at the temperature of the heap, using oxygen from the air and iron already in the ore, so much of the energy that would melt the rock is saved, and ore once treated as waste becomes worth mining.

The chemistry: iron does the work

These bacteria are unusual: instead of eating sugar, they get their energy by oxidizing iron and sulfur, and build their cells from carbon dioxide. Acidithiobacillus ferrooxidans turns ferrous iron, Fe²⁺, into ferric iron, Fe³⁺, as in the first equation below. Ferric iron is a strong oxidizer. It attacks the sulfide mineral, releasing copper ions into the solution and turning back into ferrous iron, which the bacteria oxidize again. The second equation shows this for chalcopyrite, the most common copper mineral, which leaches slowly.

4 Fe2++4 H++O2→4 Fe3++2 H2O4\,\text{Fe}^{2+} + 4\,\text{H}^{+} + \text{O}_2 \rightarrow 4\,\text{Fe}^{3+} + 2\,\text{H}_2\text{O}

CuFeS2+4 Fe3+→Cu2++2 S+5 Fe2+\text{CuFeS}_2 + 4\,\text{Fe}^{3+} \rightarrow \text{Cu}^{2+} + 2\,\text{S} + 5\,\text{Fe}^{2+}

A cycle of four boxes: ferrous iron, then bacteria with oxygen, then ferric iron, then ferric iron attacks the ore and releases copper ions, returning to ferrous iron.Fe²⁺ (ferrous)bacteria + O₂Fe³⁺ (ferric)attacks ore: Cu²⁺
The iron cycle that drives bioleaching: bacteria keep regenerating the iron that dissolves the ore.

Heap leaching, step by step

Other bacteria, such as Acidithiobacillus thiooxidans, oxidize the leftover sulfur to sulfuric acid, which keeps the solution acidic, the conditions these bacteria need. In heap bioleaching, crushed ore is piled into heaps about 2 to 10 m high and sprinkled with an acid solution. The bacteria grow on the rock inside the heap, the copper dissolves and the solution trickles to the bottom, where it is collected. The copper is then recovered from the solution, typically by solvent extraction and electrowinning, in which an electric current plates pure copper onto metal sheets, and the solution is reused. A related process, biooxidation, uses bacteria in stirred tanks at around 40°C to break open sulfide minerals that lock up gold, so the gold can then be extracted.

A worked example shows why this matters. Ore with 0.5% copper holds 5 kg of copper per metric ton. If bioleaching recovers 80%, a heap of 10,000 t gives 10,000×0.005×0.8=4010{,}000 \times 0.005 \times 0.8 = 40 t of copper, from rock that might not pay for crushing and smelting.

Five steps from top to bottom: ore is crushed and heaped; an acid solution is sprinkled on it; bacteria grow in the heap; the copper-rich solution is collected at the bottom; the copper is recovered and the solution reused.1. Ore crushed and heaped2. Acid solution sprinkled3. Bacteria grow in the heap4. Copper solution collected5. Copper recovered, reused
Heap bioleaching of copper, in outline; heaps are about 2 to 10 m high.

Benefits and risks

Bioleaching makes low-grade ore worth mining, needs less energy than smelting and avoids the sulfur dioxide smoke that smelters release. But it is slow, taking months to years, and the acid, metal-rich solution must not escape. In the Finnish Talvivaara mine, bioleaching proved environmentally and economically disastrous, and leaching rock where it lies underground can contaminate groundwater. Students should weigh both: the bacteria are the same ones that cause acid drainage from abandoned mines, so controlling where the solution goes is as important as making it. Modern heaps sit on waterproof liners so that every drop of solution can be collected and reused.

A table of advantages and risks: bioleaching uses low-grade ore but is slow, taking months to years; it makes no smelter smoke but acid can leak out; it uses less energy but metals can reach groundwater.AdvantagesRisksuses low-grade oreslow: months to yearsno smelter smokeacid can leak outless energymetals in groundwater
Bioleaching weighed: each advantage has a matching risk to manage.
Free printable worksheet

Practice: what is bioleaching?

For 12th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: what is bioleaching?Name:
  1. What is bioleaching, and which metal is it mainly used for?

  2. Fill in the missing step of the iron cycle and say where the bacteria get their energy.

    The iron cycle with the step in which the bacteria act replaced by a question mark.Fe²⁺ (ferrous)?Fe³⁺ (ferric)attacks ore: Cu²⁺
  3. Check that CuS+2 Fe3+→Cu2++S+2 Fe2+\text{CuS} + 2\,\text{Fe}^{3+} \rightarrow \text{Cu}^{2+} + \text{S} + 2\,\text{Fe}^{2+} is balanced in atoms and in charge.

  4. Fill in step 4 of heap leaching and explain why the solution is reused.

    The five steps of heap bioleaching with step 4 replaced by a question mark.1. Ore crushed and heaped2. Acid solution sprinkled3. Bacteria grow in the heap4. ?5. Copper recovered, reused
  5. Ore with 0.4% copper is leached, and 75% of the copper is recovered. How much copper comes from 2,000 t of ore?

  6. Fill in the hidden row of the table.

    The table of advantages and risks with the second row hidden.AdvantagesRisksuses low-grade oreslow: months to years??less energymetals in groundwater
  7. Why do these bacteria need the acid that they themselves help make?

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What bacteria are used in bioleaching?

Acid-loving bacteria that oxidize iron and sulfur, such as Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans and Leptospirillum ferrooxidans. Some heat-loving archaea work at higher temperatures.

Do the bacteria eat the copper?

No. They get their energy from oxidizing iron and sulfur. The ferric iron they make dissolves the copper mineral, so the copper is released as a by-product.

What is the difference between bioleaching and biooxidation?

In bioleaching the metal wanted, such as copper, dissolves into the solution. In biooxidation, used for gold, bacteria break down the minerals that lock up the gold, which stays solid and is extracted afterward.

Is bioleaching better for the environment than smelting?

It uses less energy and avoids smelter smoke, but its acid, metal-rich solutions can harm soil and water if they leak, as at Finland's Talvivaara mine. Careful containment decides the outcome.

When did bioleaching start?

Copper was recovered from mine drainage more than 300 years ago without anyone knowing microbes were involved. The key bacterium was described in 1951, and industrial bioleaching began in the 1960s.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.