• Biotechnology: environmental biotechnology, microbes that clean and recover

What are bioplastics?

Written with AI (How we create content)Target level: Grade 12Last updated: Report an error
Quick answer

Bioplastics are plastics made from biomass, such as corn or sugarcane, instead of oil. Some, like PLA and the PHA that bacteria make inside their cells, are also biodegradable; others, like polyethylene made from sugarcane, are not. Made from plants and able to break down are two different properties, and even biodegradable plastics often need industrial composting to break down quickly.

The topic explained

Two questions, not one

Bioplastics are plastics made from biomass, renewable plant material, rather than from oil or gas. The word is often used loosely, and it hides two separate questions. The first is where the carbon comes from: a plastic can be bio-based, made from plants, or fossil-based. The second is what happens at the end: a plastic is biodegradable if microbes can break it down into carbon dioxide, water and biomass. Whether a plastic breaks down depends on its molecular structure, not on whether its carbon came from a plant.

So all four combinations exist. PLA and PHA are made from plants and are biodegradable. Polyethylene can be made from sugarcane ethanol; it is bio-based, but chemically the same as ordinary polyethylene, so it does not biodegrade, though it can be recycled. And some biodegradable plastics, such as PBAT and PCL, are made from oil. The most common misreading is that bio-based means it will rot away. Students should always ask both questions separately. A third word, compostable, is narrower still: a compostable plastic must break down within a set time under composting conditions.

A two-by-two table: from plants and biodegradable, PLA and PHA; from oil and biodegradable, PBAT and PCL; from plants and not biodegradable, bio-based polyethylene from sugarcane; from oil and not biodegradable, ordinary polyethylene and PET.From plantsFrom oilBreaks downPLA, PHAPBAT, PCLDoes notbio-PE from caneordinary PE, PET
Where a plastic comes from and whether it breaks down are two separate questions.

PLA: plastic from fermented sugar

Polylactic acid, PLA, starts as plant starch from corn, cassava, sugarcane or sugar beet. The starch is broken down into sugar, and bacteria ferment the sugar into lactic acid, the same acid that sours yogurt. Chemists then join lactic acid molecules into long chains, usually by first forming a ring-shaped molecule, lactide, and opening the rings into a polymer. PLA is used for disposable cups and cutlery, food packaging, compost bags, medical screws and stitches, and as a common 3D-printing material.

PLA is compostable, but under the right conditions. In industrial composting, at about 58°C, it can partly break down within 60 days. In landfills, home compost bins, soil or the sea it breaks down very slowly; in home compost and soil, full breakdown can take close to three decades. It also softens at about 60 to 65°C, which is why PLA cups are not used for hot food in a microwave.

Five steps from top to bottom: corn or sugarcane; starch is broken down to sugar; bacteria ferment the sugar to lactic acid; the acid is joined into the polymer PLA; it is made into cups, bags and packaging.1. Corn or sugarcane2. Starch broken to sugar3. Bacteria: lactic acid4. Acid joined into PLA5. Cups, bags, packaging
PLA from crop to cup, in outline.

PHA: plastic made inside bacteria

Some bacteria make plastic themselves. When they have plenty of sugar or another carbon source but run short of nitrogen, phosphorus or oxygen, they cannot grow and divide, so they store the extra carbon as granules of polyhydroxyalkanoates, PHA, an energy reserve like fat in animals. When carbon later runs short, the bacteria break the PHA down again and use it for energy, just as animals use their fat. The granules can reach 80% of a cell's dry weight. The first of them, polyhydroxybutyrate, PHB, was isolated and described in 1925 by the French microbiologist Maurice Lemoigne. A well-studied producer is the bacterium Cupriavidus necator. Factories grow the bacteria, starve them of nitrogen, break the cells and extract the PHA, which can be molded into plastic and is biodegradable. The main obstacle is cost: the sugar that feeds the bacteria is expensive, so researchers test cheaper feeds, such as waste from making malt.

Five steps from top to bottom: bacteria grow on sugar; nitrogen runs short; the cells fill with PHA granules; the cells are broken and the PHA is taken out; it is molded into plastic.1. Bacteria grow on sugar2. Nitrogen runs short3. Cells fill with PHA4. Cells broken, PHA taken5. Molded into plastic
PHA, a plastic made inside bacteria, in outline.

Weighing the benefits

Supporters argue that bioplastics reduce dependence on oil, that their carbon was taken from the air by plants, and that biodegradable ones can be composted with food waste. Critics note that crops for plastic use land and water, that many biodegradable plastics need industrial composting facilities that are not available everywhere, and that a compostable cup thrown into the sea or a landfill may persist for years. Labels such as bio or green do not say which property a product has. The honest answer is to ask what it is made from and where it will end up.

Free printable worksheet

Practice: what are bioplastics?

For 12th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: what are bioplastics?Name:
  1. Explain the difference between a bio-based plastic and a biodegradable plastic.

  2. Fill in the hidden cells of the table.

    The two-by-two table with the plant-based, non-biodegradable example and the oil-based, biodegradable examples hidden.From plantsFrom oilBreaks downPLA, PHA?Does not?ordinary PE, PET
  3. Fill in step 3 of making PLA, and name the food in which the same molecule is made.

    The five steps of making PLA with step 3 replaced by a question mark.1. Corn or sugarcane2. Starch broken to sugar3. ?4. Acid joined into PLA5. Cups, bags, packaging
  4. Fill in step 2 of making PHA and explain why it makes the bacteria store plastic.

    The five steps of making PHA with step 2 replaced by a question mark.1. Bacteria grow on sugar2. ?3. Cells fill with PHA4. Cells broken, PHA taken5. Molded into plastic
  5. A batch yields 50 kg of dry cells, and PHA makes up 80% of their dry weight. How much PHA can be extracted at most?

  6. A PLA cup is thrown into a home compost bin. Will it break down in a few months? Explain.

  7. Give one argument for and one concern about bioplastics.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

Are all bioplastics biodegradable?

No. Bioplastic usually means made from biomass. Some, such as PLA and PHA, are biodegradable, but others, such as polyethylene made from sugarcane, are chemically identical to ordinary plastic and do not biodegrade.

Is PLA biodegradable?

Yes, but slowly outside industrial composting. At about 58°C it can partly break down within 60 days; in home compost, soil or the sea it may take many years.

What is PHA made from?

Bacteria make PHA inside their cells from sugar or other carbon sources when they are short of nitrogen, phosphorus or oxygen. The plastic is then extracted from the cells.

Can bioplastics be recycled?

Some can. Bio-based polyethylene can be recycled with ordinary polyethylene. Biodegradable plastics such as PLA need separate handling, and mixed into ordinary plastic recycling they can cause problems.

Why are bioplastics more expensive?

Much of the cost is the raw material and the process: sugar to feed microbes, fermentation, extraction and purification, made at a smaller scale than oil-based plastics.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.