• Biotechnology: molecular diagnostics, reading DNA to answer questions

What is qPCR?

Written with AI (How we create content)Target level: Grade 12Last updated: Report an error
Quick answer

qPCR, quantitative or real-time PCR, is PCR that measures how much target DNA a sample held at the start. A fluorescent dye or probe glows more as copies build up, the machine reads it after every cycle, and the threshold cycle, Ct, where the glow crosses a set line, comes earlier the more target there was: about one cycle earlier for each doubling.

The topic explained

PCR that counts

Ordinary PCR answers yes or no: after 30 cycles a band on a gel shows whether the target was there. qPCR, quantitative PCR, also called real-time PCR, answers how much. The tube holds a fluorescent signal that grows with the product, and the machine reads it after every cycle, building an amplification curve. Higuchi and his colleagues introduced this real-time reading in the early 1990s. The machine reads through the closed tube, so the product never has to be opened on a bench, which lowers the risk of contaminating later tests.

There are two common signals. SYBR Green is a dye that glows when it binds any double-stranded DNA; it is cheap, but it also lights up a wrong product, so a melt curve at the end checks that only one product formed. A hydrolysis probe is a short strand that binds the target between the two primers and carries a reporter dye and a quencher that keeps it dark. As the polymerase extends the primer, it cuts the probe, the reporter is freed from the quencher and glows. Only the target sequence can bind the probe, so the signal is specific.

Five steps from top to bottom: a probe binds the target between the primers; its quencher keeps the reporter dark; the polymerase cuts the probe as it extends; the freed reporter glows; the signal grows every cycle.1. Probe binds the target2. Quencher keeps it dark3. Polymerase cuts the probe4. Freed reporter glows5. Signal grows every cycle
A hydrolysis probe: only the target sequence makes it glow.

The threshold cycle

Every amplification curve has three parts: a flat baseline while the product is too little to see, an exponential rise as it doubles each cycle, and a plateau when primers and nucleotides run low. A threshold line is set across the exponential part, and the cycle at which a curve crosses it is the threshold cycle, Ct. The more target at the start, the fewer cycles are needed, so a lower Ct means more target. The threshold is placed above the noise of the baseline, where every curve is still rising exponentially, so that all reactions are compared at the same point.

With perfect doubling, each cycle earlier means twice as much target. In the invented curves, sample A crosses at 21.9 and sample B at 24.9, three cycles apart, so A held 23=82^{3} = 8 times more target than B. Ten times more target is log⁡210≈3.32\log_2 10 \approx 3.32 cycles earlier. The common misreading is that a high Ct means a lot of target; it is the reverse.

Two S-shaped amplification curves of fluorescence against cycle number, sample A rising earlier than sample B. A horizontal threshold line at 0.2 is crossed by sample A at cycle 21.9 and by sample B at cycle 24.9.cyclefluorescence51015202530350.20.40.60.810sample Asample B
Invented curves; the line is the threshold. A crosses at cycle 21.9, B at 24.9: about 2³ = 8 times more target in A.

From Ct to a number of copies

To turn Ct into copies, a standard curve is run on the same plate: dilutions with known numbers of copies, from 10210^2 to 10610^6. Plotting Ct against the logarithm of the copies gives a straight line. In our example it is Ct=38−3.32log⁡10NCt = 38 - 3.32 \log_{10} N, so an unknown sample with Ct 26.38 has log⁡10N=(38−26.38)÷3.32=3.5\log_{10} N = (38 - 26.38) \div 3.32 = 3.5, about 3,162 copies.

The slope also checks the reaction. The efficiency is E=10−1/slope−1E = 10^{-1/\text{slope}} - 1: a slope of −3.32 gives 1.00, perfect doubling, while −3.6 gives about 0.90, so only 90% of the molecules are copied each cycle. Laboratories usually accept efficiencies near 90 to 110%.

A straight standard curve of threshold cycle against log of starting copies: 31.4 at 10², 28.0 at 10³, 24.7 at 10⁴, 21.4 at 10⁵ and 18.1 at 10⁶. An unknown at Ct 26.4 lies at log 3.5.log₁₀ copiesCt1234561520253035
Invented standards with slope −3.32, 100% efficiency; the extra point is an unknown at Ct 26.38.

What it measures, and its cautions

qPCR measures the amount of a virus in a sample, the share of GM material in a food, and, after reverse transcription, RT-qPCR, how strongly a gene is expressed compared with a reference gene in the same sample. The comparison is relative: if a gene's Ct falls by 2 after a treatment while the reference gene's Ct stays the same, the gene's RNA rose about 22=42^{2} = 4 times. Every run needs a no-template control, which should stay flat. A Ct value depends on the sample, the kit and the machine, so it is compared only within one validated test, and a medical result is explained by a doctor.

Free printable worksheet

Practice: what qPCR is

For 12th grade biotechnology students. Use the graphs and numbers on the sheet, show every calculation, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: what qPCR isName:
  1. The marked points show where each curve crosses the threshold: sample A at cycle 21.9, sample B at 24.9. Which sample held more target, and why?

    The two amplification curves with the threshold line, and a dot where each curve crosses it.cyclefluorescence51015202530350.20.40.60.810sample Asample B
  2. How many times more target did sample A hold than sample B, assuming perfect doubling?

  3. Two samples have Ct 26 and Ct 30. How many times more target is in the first?

  4. Use the standard curve, Ct = 38 − 3.32 log N, to find the number of copies in the unknown at Ct 26.38.

    The standard curve of Ct against log of starting copies with an unknown sample at Ct 26.4 whose number of copies is asked for.log₁₀ copiesCt1234561520253035
  5. A standard curve has a slope of −3.6. Calculate the efficiency and say what it means.

  6. Fill in step 3 and explain why a probe gives a more specific signal than SYBR Green.

    The five steps of a hydrolysis probe with step 3 replaced by a question mark.1. Probe binds the target2. Quencher keeps it dark3. ?4. Freed reporter glows5. Signal grows every cycle
  7. The no-template control gives an amplification curve with Ct 33. What does this show, and what should be done?

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What is the difference between PCR and qPCR?

PCR copies a target and is usually checked at the end on a gel. qPCR measures fluorescence after every cycle, so it shows how much target the sample held at the start, without a gel.

What does a Ct value mean?

The cycle at which the fluorescence crosses the threshold. A lower Ct means more starting target; each cycle earlier means about twice as much, with perfect doubling.

What is the difference between RT-PCR and qPCR?

RT-PCR starts by copying RNA into DNA with reverse transcriptase. qPCR measures the product in real time. They are often combined as RT-qPCR, for example to measure an RNA virus or a gene's expression.

Why is a standard curve needed?

Ct alone gives only relative amounts. Standards with known numbers of copies, run on the same plate, give the line that turns each Ct into a number of copies.

What is a melt curve?

At the end of a SYBR Green run the product is slowly heated while fluorescence is read. A single sharp drop at one temperature shows one product; several drops show unwanted products.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.