- Biotechnology: industrial bioprocessing, from the fermenter to the product
What is scale-up in bioprocessing?
Scale-up in bioprocessing is moving a process that works in a small flask or laboratory bioreactor to pilot and then production tanks thousands of times larger, while keeping the cells as productive. It is hard because a big tank is not a big flask: its surface per liter shrinks, so supplying oxygen, mixing evenly and removing heat all become harder.
The topic explained
From a flask to a factory tank
Scale-up in bioprocessing is the path a process takes from the laboratory to the factory. A researcher finds a strain and conditions that make a product in a shake flask holding less than a liter. Next comes a bench bioreactor of a few liters, with sensors for temperature, pH and dissolved oxygen. Then a pilot plant of hundreds or thousands of liters, and finally production tanks of tens of thousands of liters or more. At each stage the question is the same: do the cells still behave as they did in the smaller vessel?
Often they do not. Yields fall, unwanted products appear, or the culture grows unevenly. Students often assume that scaling up is just multiplying the recipe, ten times the medium in a tank ten times bigger. The cells may be the same, but the world around them changes with size, and each stage exists to find those changes while a failure is still cheap.
The geometry that changes everything
Imagine tanks of the same shape, a cube for simplicity. Make each side 10 times longer and the volume grows 1,000 times, but the surface area only 100 times. The area per volume therefore falls to a tenth. A 1-liter cube has 6 square decimeters of wall per liter; a 1,000-liter cube has only 0.6.
This matters because the culture's needs grow with its volume while some of the ways to meet them grow with surface. Living cells release heat, roughly in proportion to how many there are, but heat leaves mainly through the wall. A flask cools itself in the air; a production tank needs a cooling jacket and coils inside, or the culture overheats. In the same way, oxygen that enters a flask through its surface is far from enough for a large tank.
Oxygen, mixing and shear
Oxygen dissolves poorly in water, less than 10 milligrams per liter at the temperatures cultures are grown at, and an aerobic culture uses it up within moments. A large fermenter therefore blows air through the liquid, sparging, and stirs it hard to break the bubbles and spread them.
Mixing gets slower with size: a drop of acid added to a flask spreads almost at once, but in a tank of tens of thousands of liters it takes far longer to reach every corner. Cells travel through zones with more and less oxygen, sugar or acid, and respond to each one. Faster stirring helps, but the tip of a large impeller moves fast and creates shear, forces that can damage fragile cells, such as animal cells. Engineers balance these needs, often keeping one quantity, such as the oxygen transfer rate, constant from stage to stage.
The penicillin story
The classic case is penicillin in the Second World War. The mold grew as a mat on the surface of liquid in bottles and trays, which could never supply an army. American scientists and companies moved it into deep, aerated, stirred tanks. In August 1943 Pfizer opened a 7,600-liter pilot fermenter, and on 1 March 1944 a plant with fourteen tanks of 130,000 liters each. US output rose from about 21 billion units in 1943 to about 1,663 billion in 1944, roughly 79 times more, and to an estimated 6,852 billion in 1945. Bigger tanks were only part of the gain: a richer medium containing corn steep liquor raised yields about tenfold, and better strains of the mold followed. Deep tanks with constant air and strong stirring still shape fermenters today.
Practice: scale-up in bioprocessing
For 11th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.
Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.
Fill in stage 3 and explain why a process passes through it before production.
Tanks of the same shape: if every length is made 10 times longer, by how much do the volume, the surface area and the area per volume change?
For a cube-shaped tank, area per volume is 6 divided by the side in decimeters. Find the value at 125 liters.
A process moves from an 8-liter cube to a 1,000-liter cube. How many times smaller is the area per volume?
Fill in the hidden row: why does removing heat get harder in a large tank, and what do engineers do?
Why can faster stirring harm animal cells in a large tank?
US penicillin output was about 21 billion units in 1943 and 1,663 billion in 1944. About how many times larger was the 1944 output, and what change in method made it possible?
Common questions
What is the difference between scale-up and scale-out?
Scale-up uses ever larger vessels for the same process. Scale-out runs many smaller vessels side by side, which suits some cell therapies where each batch is small.
Why not just build a bigger flask?
A bigger flask has much less surface per liter, so oxygen from the surface and cooling through the wall are no longer enough. Large tanks need sparging, strong stirring and cooling systems.
What is a pilot plant?
A plant of intermediate size, often hundreds or thousands of liters, where a process is tested before production. It reveals problems with mixing, oxygen and heat while a failure is still cheap.
What does kLa mean in a bioreactor?
kLa is the volumetric oxygen transfer coefficient: how fast oxygen moves from the gas bubbles into the liquid. It is often kept constant from one scale to the next.
How large are industrial fermenters?
They range widely. In 1944 Pfizer's penicillin plant had tanks of 130,000 liters each, and production tanks today are commonly tens of thousands of liters or more.

Still have a question? Ask Lessi
Any question about this subject. Lessi answers right here, step by step.
Try asking
Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.
Learn it with a teacher
Learn this topic live with Lessi
Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.