• Biotechnology: industrial bioprocessing, from the fermenter to the product

What is good manufacturing practice (GMP)?

Written with AI (How we create content)Target level: Grade 11Last updated: Report an error
Quick answer

Good manufacturing practice, GMP, is the set of rules a factory follows so that every batch of a medicine, food or cosmetic is made the same way and to the same quality. It requires written procedures, trained staff, clean controlled rooms, validated processes, a record of every step and testing before release, so that a problem is caught before the product reaches anyone.

The topic explained

The same product in every batch

A medicine is not made once. A factory makes it in batches, one tank or one production run at a time, and every batch must be the same: the same amount of active substance, the same purity, free of contamination. Good manufacturing practice, GMP, is the set of rules that makes this happen. It covers medicines, many foods and supplements, cosmetics and medical devices, and its main purpose is to prevent harm to the person who finally uses the product.

GMP asks for clean, controlled rooms; written procedures for every task; trained staff who follow them; equipment that is checked and maintained; processes that are validated, shown to give the right result every time; and records made during production, so the full history of each batch can be traced. In the United States the rules are called current good manufacturing practice, CGMP, and are set out in Title 21 of the Code of Federal Regulations. A common misreading is that GMP is about testing the final product. Testing is only one part: the rules assume quality is built in at every step, because a test of a few samples cannot find every problem in a batch.

Five steps from top to bottom: raw materials are tested; the product is made by a written procedure; every step is recorded; quality control tests samples; quality assurance reviews the record and the batch is released.1. Raw materials tested2. Made by written procedure3. Every step recorded4. QC tests samples5. QA review, then release
The path of one batch under good manufacturing practice, in outline.

Rules written after disasters

Many of these rules came after tragedies. In 1937 a company in the United States dissolved an antibacterial drug, sulfanilamide, in diethylene glycol, a toxic solvent, and sold it as a syrup without testing it; it is believed to have killed 107 people. The next year Congress passed the Federal Food, Drug, and Cosmetic Act, which required drugs to be shown safe before sale. In the early 1960s thalidomide, a sedative given to pregnant women in many countries, caused severe birth defects, and in 1962 the United States passed the Kefauver-Harris Amendment in response, which speaks of good manufacturing practices covering the quality of both the process and the product. Europe and the World Health Organization have their own GMP guidelines, and each country's health authority inspects factories.

A vertical timeline: 1937, a toxic solvent in a medicine kills about a hundred people in the United States; 1938, a US law requires drugs to be shown safe; 1962, after thalidomide, a US amendment speaks of good manufacturing practices.1937Toxic solvent in a medicine1938US law: safety first1962After thalidomide: GMP
Disasters that shaped the rules, 1937 to 1962.

Quality control and quality assurance

Students often mix up two terms. Quality control, QC, is the laboratory side: it tests samples of raw materials, of the product in the middle of the process and of the finished batch against a specification, a list of limits, such as identity, purity, amount of active substance and, for an injection, sterility. Quality assurance, QA, is the whole system that makes quality happen: it writes and approves procedures, trains staff, audits the factory, investigates every deviation from a procedure and reviews the complete batch record before a batch is released. QC asks whether this batch meets its specification; QA asks whether the process that made it was run correctly. A batch can pass every test and still be held if its record shows a step was skipped.

Records follow strict habits too. Each entry is written when the step is done, signed and dated, and never rewritten afterward: a mistake is crossed out with a single line so the original stays readable, with the reason and a signature beside it. In a biotech plant that makes a protein drug in cells, the rules also cover the cell bank the process starts from, the culture media, the cleaning of tanks between batches, and the air and water in the rooms.

A table comparing quality control and quality assurance: control tests samples after each step and asks whether the product meets its specification, for example a purity test; assurance runs the whole system all the time and asks whether it is made right, for example training and audits.Quality controlQuality assuranceWhattests samplesruns the systemWhenafter each stepall the timeExamplepurity testtraining, auditsAsksdoes it meet spec?is it made right?
Two parts of one quality system.

Releasing a batch: a worked example

Suppose the specification says each batch must contain 95% to 105% of the amount on the label. Five batches are tested and give 99%, 102%, 97%, 93% and 101%. Batches 1, 2, 3 and 5 are within the limits. Batch 4, at 93%, is out of specification: it is not released, and QA opens an investigation to find the cause, such as a weighing error or a failed step, and to decide whether other batches were affected. The logic: a limit is set in advance, and a result outside it is never averaged away.

A bar chart of the potency of five batches in percent of the label claim, with limits at 95% and 105%: 99, 102, 97, 93 and 101. Batch 4, at 93%, is below the lower limit.% of label8590951001051234595%105%
A made-up example; the scale starts at 80%. Batch 4 is out of specification and is not released.
Free printable worksheet

Practice: good manufacturing practice

For 11th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: good manufacturing practiceName:
  1. What is the main purpose of good manufacturing practice?

  2. Fill in step 4 and explain why the steps before it matter even if the final test passes.

    The five steps of a batch with step 4 replaced by a question mark.1. Raw materials tested2. Made by written procedure3. Every step recorded4. ?5. QA review, then release
  3. Fill in the question that quality control asks and the question that quality assurance asks.

    The table comparing quality control and quality assurance with the question each one asks hidden.Quality controlQuality assuranceWhattests samplesruns the systemWhenafter each stepall the timeExamplepurity testtraining, auditsAsks??
  4. What happened in 1937, and which law followed in 1938?

  5. The limits are 95% to 105% of the label. Which batch is out of specification, and what happens to it?

    A bar chart of the potency of five batches, 99, 102, 97, 93 and 101 percent of the label claim, with limits at 95% and 105%, all bars in the same color.% of label8590951001051234595%105%
  6. Three samples of one batch give 96.5%, 98.0% and 97.0%. Find the mean and decide whether the batch meets limits of 95% to 105%.

  7. A batch passed all its tests, but its record shows that a cleaning step was skipped. Should it be released? Explain.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What does GMP stand for?

Good manufacturing practice: the rules that make every batch of a medicine, food or cosmetic consistent and safe. In the United States it is called current good manufacturing practice, CGMP.

What is the difference between QC and QA?

Quality control tests samples against a specification. Quality assurance is the whole system, procedures, training, audits and record review, that makes sure the process itself is run correctly.

What is a batch record?

The written or electronic record made while a batch is produced, showing every step, the materials used, who did each step and the results. It lets the full history of the batch be traced.

What does validation mean in GMP?

Showing with evidence that a process or a piece of equipment gives the right result every time it is used, before it is used to make product for sale.

Does GMP apply to food as well as medicines?

Yes. GMP rules cover medicines, many foods and dietary supplements, cosmetics and medical devices, with stricter requirements where the risk to the user is greater, such as injections.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.