• Biotechnology: enzymes, how they work and how industry uses them

What is the difference between competitive and non-competitive inhibition?

Written with AI (How we create content)Target level: Grade 11Last updated: Report an error
Quick answer

In competitive inhibition a molecule shaped like the substrate occupies the enzyme's active site, so adding more substrate can outcompete it: Vmax stays the same but Km rises. In non-competitive inhibition the inhibitor binds another site and changes the enzyme's shape, so more substrate does not help: Vmax falls and Km stays the same.

The topic explained

Two ways to slow an enzyme

An inhibitor is a molecule that binds an enzyme and slows it. The difference between competitive and non-competitive inhibition is where it binds. A competitive inhibitor resembles the substrate and sits in the active site, so while it is there the substrate cannot bind; the two compete for the same place. A classic example is malonate, which resembles succinate and blocks the enzyme that acts on succinate in cellular respiration.

A non-competitive inhibitor binds somewhere else on the enzyme, at an allosteric site, and changes the enzyme's shape so that the active site works less well, even with substrate in it. It does not resemble the substrate at all.

A table comparing competitive and non-competitive inhibitors: competitive binds the active site and resembles the substrate, more substrate overcomes it, Vmax unchanged and Km higher; non-competitive binds another site and does not resemble the substrate, more substrate does not help, Vmax lower and Km unchanged.CompetitiveNon-competitivebindsthe active siteanother siteshapelike substrateunlike substratemore substrateovercomes itdoes not helpVmaxunchangedlowerKmhigherunchanged

How to tell them apart: add substrate

The test is to raise the substrate concentration. With a competitive inhibitor, more substrate molecules win the competition more often, and at very high substrate the rate approaches the same Vmax as without the inhibitor. But more substrate is needed to reach half that rate, so the apparent Km rises: in the model drawn here, from 2 to 6. With a non-competitive inhibitor, part of the enzyme is out of action whatever the substrate, so Vmax falls, here from 10 to 5, while Km does not change.

A common mistake is to say that a competitive inhibitor lowers Vmax. Look at the far right of the graph: given enough substrate, the competitive curve still climbs toward 10.

Put numbers on it with the Michaelis–Menten equation. At [S]=20[S] = 20, the rate without inhibitor is 10×202+20≈9.1\frac{10 \times 20}{2 + 20} \approx 9.1; with the competitive inhibitor, 10×206+20≈7.7\frac{10 \times 20}{6 + 20} \approx 7.7; with the non-competitive one, 5×202+20≈4.5\frac{5 \times 20}{2 + 20} \approx 4.5. Raise the substrate to 100 and the competitive rate reaches about 9.4, while the non-competitive rate can never pass 5.

Three rate curves against substrate concentration: with no inhibitor the curve rises toward 10; with a competitive inhibitor it rises more slowly but still approaches 10 at high substrate; with a non-competitive inhibitor it levels off at 5.[S]rate v246810121416182468100no inhibitorcompetitivenon-competitive
Model curves: Vmax 10 and Km 2; competitive, Km 6; non-competitive, Vmax 5.

Inhibition the cell uses, and inhibition we design

Cells use inhibition to control themselves. In feedback inhibition the end product of a pathway inhibits the enzyme of the first step: when enough isoleucine has been made from threonine, isoleucine binds the first enzyme of that pathway and switches it off, and when isoleucine runs low the brake comes off. Nothing is wasted making what the cell already has.

Many medicines and poisons are enzyme inhibitors. Most of the above are reversible: the inhibitor binds and leaves. An irreversible inhibitor binds for good; penicillin, for example, permanently blocks the bacterial enzymes that build the cell wall. In biotechnology, knowing which kind of inhibitor is present tells you whether adding substrate will rescue a process.

A pathway of three boxes, threonine, intermediates, isoleucine, joined by arrows, with enzyme 1 under the first arrow; a line from isoleucine returns to the first arrow, marked isoleucine inhibits enzyme 1.threonineintermediatesisoleucineenzyme 1isoleucine inhibits enzyme 1
Feedback inhibition: the end product switches off the first step.
Free printable worksheet

Practice: competitive and non-competitive inhibition

For 11th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your work against the answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: competitive and non-competitive inhibitionName:
  1. Fill in the effect of each kind of inhibitor on Vmax and on Km.

    The comparison table with the effects on Vmax and on Km replaced by question marks.CompetitiveNon-competitivebindsthe active siteanother siteshapelike substrateunlike substratemore substrateovercomes itdoes not helpVmax??Km??
  2. Read the graph. Which curve shows a competitive inhibitor and which a non-competitive one? Explain from the shape of the curves at high substrate.

    The three rate curves: no inhibitor approaching 10, competitive approaching 10 more slowly, non-competitive levelling off at 5.[S]rate v246810121416182468100no inhibitorcompetitivenon-competitive
  3. With Vmax = 10 and Km = 2, the rate at [S] = 2 is 5. A competitive inhibitor raises the apparent Km to 6. What is the rate at [S] = 2 now?

  4. Malonate resembles succinate. Predict what kind of inhibitor it is for the enzyme that acts on succinate, and how the cell could overcome it.

  5. Fill in the end product of the pathway, and explain why the cell inhibits the first enzyme rather than the last.

    The pathway from threonine to isoleucine with the end product replaced by a question mark.threonineintermediates?enzyme 1isoleucine inhibits enzyme 1
  6. What is the difference between a reversible and an irreversible inhibitor? Give an example of an irreversible one.

  7. A factory process slows down because of an unknown inhibitor. Adding much more substrate brings the rate almost back to normal. What kind of inhibitor is it likely to be?

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What is an allosteric site?

An allosteric site is a place on an enzyme other than the active site. A molecule binding there changes the enzyme's shape and so its activity, either slowing it, as a non-competitive inhibitor does, or in some enzymes speeding it up.

Is feedback inhibition competitive or non-competitive?

Usually neither in the strict sense: the end product typically binds an allosteric site on the first enzyme of the pathway, changing its shape. It works like a non-competitive brake that the cell can release.

Why are many drugs enzyme inhibitors?

Blocking one enzyme can stop a whole process, such as a bacterium building its wall or a virus copying itself. A drug that fits only the target enzyme can do that while leaving the body's other enzymes alone.

Can an inhibitor be both competitive and non-competitive?

Some inhibitors show a mixture of both behaviors, lowering Vmax and changing Km at the same time. They are called mixed inhibitors.

Do heavy metals inhibit enzymes?

Yes. Ions such as mercury and lead can bind groups on enzymes and change their shape, often irreversibly, which is part of why they are toxic.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.