• Biotechnology: microbiology, bacteria, growth and fermentation

How do you count bacteria in a sample?

Written with AI (How we create content)Target level: Grade 10Last updated: Report an error
Quick answer

To count bacteria in a sample, microbiologists dilute it step by step, usually tenfold each time, spread a small volume of each dilution on agar plates and count the colonies after incubation. Only a plate with 30 to 300 colonies is counted, and the count is multiplied back by the dilution: colony-forming units per mL = colonies ÷ (dilution × volume plated).

The topic explained

Too many to count, so count colonies

A single drop of a culture can hold millions of bacteria, far too many and too small to count one by one. So microbiologists let each living cell count itself. Spread on a plate of nutrient agar and kept warm overnight, every cell that can divide grows into a colony, a spot of millions of cells that you can see without a microscope. Count the spots and you know how many living cells were spread.

The result is given in colony-forming units, CFU, not in cells. Two cells stuck together grow into one colony, so a CFU stands for whatever started a colony. A count of 156 CFU means at least 156 living cells, perhaps a few more.

Serial dilution, step by step

Spread the undiluted culture and the plate becomes one solid lawn. So the sample is first diluted in a serial dilution. Move 1 mL of sample into 9 mL of sterile liquid: the new tube is diluted 1:10, or 10−110^{-1}. Mix, and move 1 mL of that into the next 9 mL: now 10−210^{-2}. Each step divides by ten again, and the dilutions multiply: after five tubes the last one is 10−510^{-5}, one hundred thousand times weaker than the sample.

Then a small, measured volume, often 0.1 mL, from several tubes is spread on separate plates. A common mistake is to add the dilutions instead of multiplying them: three tenfold steps give 10−310^{-3}, a thousandfold dilution, not thirtyfold.

Five dilution tubes in a row labelled 10 to the minus 1 through 10 to the minus 5, with an arrow from each to the next: 1 mL is moved into 9 mL at each step, so each tube is 10 times weaker than the one before.10⁻¹10⁻²10⁻³10⁻⁴10⁻⁵1 mL into 9 mL, each stepeach tube is 10 times weaker
Schematic. A tenfold serial dilution.

Choosing the plate and calculating

Only a plate with 30 to 300 colonies is counted. With fewer, chance has too large an effect on the number; with more, the colonies crowd each other and merge. Say three plates of 0.1 mL each give 1,560 colonies at 10−410^{-4}, 156 at 10−510^{-5} and 16 at 10−610^{-6}. Only the 10−510^{-5} plate is in range.

Now work back to the sample. Divide the colonies by the dilution and by the volume spread:

CFU/mL=15610−5×0.1=1.56×108\text{CFU/mL} = \frac{156}{10^{-5} \times 0.1} = 1.56 \times 10^{8}CFU/mL=15610−5×0.1=1.56×108\begin{aligned} \text{CFU/mL} &= \frac{156}{10^{-5} \times 0.1} \\ &= 1.56 \times 10^{8} \end{aligned}

A table of three plates, each spread with 0.1 mL: from the 10 to the minus 4 dilution, 1,560 colonies, too many to count; from 10 to the minus 5, 156 colonies, counted; from 10 to the minus 6, 16 colonies, too few.Dilution platedColoniesCount it?10⁻⁴1,560no: too many10⁻⁵156yes10⁻⁶16no: too few

Reading the plates, and other ways to count

Check your answer against the plates you did not count: a plate ten times more diluted should hold about a tenth as many colonies, and here 16 is close to a tenth of 156. Students often forget the volume: 0.1 mL is a tenth of a millilitre, so the count must be multiplied by 10 as well as by the dilution. A plate count finds only living cells that grow on that agar. A counting chamber under the microscope counts dead cells too, and the cloudiness of a culture, measured in a spectrophotometer, gives a fast estimate that is checked against plate counts.

A bar chart of colonies on two plates: 156 on the 10 to the minus 5 plate and 16 on the 10 to the minus 6 plate, with horizontal lines at 30 and 300 marking the countable range.platecolonies50100150200250300010⁻⁵: 15610⁻⁶: 16
Lines at 30 and 300 colonies: only a plate between them is counted.
Free printable worksheet

Practice: serial dilution and the plate count

For 10th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your work against the answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: serial dilution and the plate countName:
  1. What is the dilution in the tube marked with a question mark? Explain.

    The row of five dilution tubes with the label of the fourth tube replaced by a question mark.10⁻¹10⁻²10⁻³?10⁻⁵1 mL into 9 mL, each stepeach tube is 10 times weaker
  2. Why are results given in colony-forming units and not in cells?

  3. Which plates should be counted? Fill in the last column and explain.

    The table of three plates with the last column, whether to count each plate, replaced by question marks.Dilution platedColoniesCount it?10⁻⁴1,560?10⁻⁵156?10⁻⁶16?
  4. Using the plate you chose, calculate the CFU per mL of the original sample. 0.1 mL was spread on each plate.

  5. A plate spread with 0.2 mL of a 1:10,000 dilution grew 95 colonies. How many CFU per mL were in the sample?

  6. Read the chart. Which plate is in the countable range, and how do the two counts check each other?

    The bar chart of colonies on the 10 to the minus 5 and 10 to the minus 6 plates with the lines at 30 and 300, and the numbers on the bars replaced by question marks.platecolonies50100150200250300010⁻⁵: ?10⁻⁶: ?
  7. A student counted 2 × 10⁸ cells per mL under the microscope but 1.5 × 10⁸ CFU per mL on plates. Give a reason for the difference.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

Why is the countable range 30 to 300 colonies?

Below about 30 colonies, chance changes the count too much from one plate to the next. Above about 300, colonies crowd and merge and are hard to count. The range keeps the count both reliable and readable.

What does TNTC mean on a plate?

TNTC stands for too numerous to count. It is written on a plate with far more than 300 colonies, which is not used in the calculation.

Does a plate count find all the bacteria in a sample?

No. It finds only living cells that can grow on that medium at that temperature. Many bacteria in nature, and dead cells, do not form colonies, so other methods are used to count them.

Why must the tubes be mixed between steps?

Bacteria settle and spread unevenly in a liquid. Without mixing, the 1 mL moved to the next tube may hold more or fewer cells than its share, and every later dilution carries the error.

Where is the plate count used in real life?

It is used to check the quality of drinking water and of foods such as milk, to follow cultures in industry and research, and to test how well a disinfectant or a preservative works.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.