• Geography: where farms, factories and firms locate

What is Weber's theory of industrial location?

Written with AI (How we create content)Target level: Grade 11Last updated: Report an error
Quick answer

Weber's theory of industrial location, published by the German economist Alfred Weber in 1909, says a factory locates where its costs are lowest, above all the cost of carrying raw materials in and products out. Industries whose materials lose weight in processing locate near the materials; industries that gain weight locate near the market. Cheap labor and clustering with other firms can pull the factory elsewhere.

The topic explained

The least-cost site

In 1909 Alfred Weber, a German economist, asked a simple question: where should a factory be built? His answer, Weber's theory of industrial location, is a least-cost theory. Weber assumed a factory sells its product at the same price anywhere, so it makes most profit where its costs are lowest. The biggest cost that changes from place to place is transport, which he measured in ton-kilometers: tons carried times kilometers traveled. Like von Thünen, Weber simplified the world on purpose: the raw materials and the market sit at fixed, known points, transport cost rises in proportion to weight and distance, and workers can be found at fixed places at known wages.

His classic picture is the locational triangle: two sources of raw material and one market. In our made-up example, each ton of product needs 2 tons of ore from mine A and 1 ton of coal from mine B, and every side of the triangle is 100 km. The factory is pulled toward each corner by the weight that must travel to or from it.

Schematic locational triangle: mine A with 2 tons of ore at the bottom left, mine B with 1 ton of coal at the bottom right and the market for 1 ton of product at the top, each side 100 km; the best factory site is circled at mine A, marked factory here.mine A: 2 t of oremine B: 1 t of coalmarket: 1 t of product100 km100 km100 kmfactory here
Schematic, a made-up example: all three sides are 100 km.

Calculating the pull of each corner

Try each corner. A factory at mine A carries 1 ton of coal 100 km and 1 ton of product 100 km: 1×100+1×100=2001 \times 100 + 1 \times 100 = 200 ton-km. At mine B it carries 2 tons of ore and the product: 2×100+1×100=3002 \times 100 + 1 \times 100 = 300. At the market it carries both materials: 2×100+1×100=3002 \times 100 + 1 \times 100 = 300. Mine A wins, because the heaviest load no longer has to move.

A common mistake is to place the factory in the middle of the triangle. The middle is the best site only when the pulls are equal. When one load is much heavier, the least-cost point moves toward it, and here it reaches the corner itself. The rule of thumb is that the heaviest pull wins: if the product weighed more than all the materials together, the market corner would win instead.

Bar chart of the total transport cost per ton of product for three factory sites: 200 ton-kilometers at mine A, 300 at mine B and 300 at the market.at mine A200 t-kmat mine B300 t-kmat the market300 t-km
Calculated from the triangle: the lowest bar marks the least-cost site.

The material index

Weber summed this up in the material index: the weight of the localized raw materials divided by the weight of the product. Localized materials exist only in certain places, such as ore; ubiquitous materials, such as water, are found everywhere and are not counted.

If the index is above 1, the industry is weight-losing: smelting ore or crushing sugar cane throws away much of the weight, so it pays to process near the source. If it is below 1, the industry is weight-gaining: a brewery or a soft drink plant adds water, which is heavy but available anywhere, so it locates near its customers. In our triangle the index is (2+1)÷1=3(2 + 1) \div 1 = 3, and the factory goes to a mine.

Table comparing weight-losing and weight-gaining industries: material index above or below 1, locating near raw materials or the market, the reason, and examples such as smelting and sugar against brewing and soft drinks.Weight-losingWeight-gainingMaterial indexabove 1below 1Locates nearraw materialsthe marketWhyless to carryadds waterExamplesmelting, sugarbrewing, drinks

Labor, clusters and the limits of the model

Transport is not the only cost. A site with cheaper workers can be worth the extra transport if the savings per ton are larger than the added transport cost; Weber drew this as the critical isodapane, the line where the two are equal. Firms also gain from agglomeration, sharing suppliers and skilled workers with neighbors. Critics point out that Weber assumed fixed prices, perfect knowledge and one market, and that for modern industries, such as software or chip design, transport is a tiny cost beside skills and research. The model still explains well why steel, cement and sugar plants sit where they do.

Four boxes from top to bottom joined by arrows: start at the least-cost site, find a site with cheap labor, weigh the savings against the extra transport, and move if the savings are larger.Start at the least-cost siteFind a site with cheap laborSavings vs. extra transportMove if savings are larger
Free printable worksheet

Practice: Weber's theory of industrial location

For 11th grade geography students. Use the triangle, chart, table and chain printed on the sheet to answer each question, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: Weber's theory of industrial locationName:
  1. In this made-up example each ton of product needs 2 tons of ore and 1 ton of coal, and the product is sold at the market. Label the three corners: the bottom left is mine A, the bottom right mine B, the top the market. Say what moves to or from each.

    The locational triangle with the three corner labels replaced by question marks; the sides are each 100 km.???100 km100 km100 km
  2. Calculate the hidden value: the transport cost of a factory at mine A, in ton-kilometers.

    The bar chart of transport costs at mine A, mine B and the market with the value of mine A hidden.at mine A?at mine B300 t-kmat the market300 t-km
  3. A juice plant uses 1.5 tons of fruit for every ton of juice. Calculate its material index and say where it should locate.

  4. A material source and a market are 100 km apart. A product needs 4 tons of material per ton. Compare the transport cost of a factory at the source and at the market.

  5. Fill in the two hidden cells of the table. Choose from: brewing, drinks; raw materials.

    The table of weight-losing and weight-gaining industries with two cells hidden: where a weight-losing industry locates and an example of a weight-gaining one.Weight-losingWeight-gainingMaterial indexabove 1below 1Locates near?the marketWhyless to carryadds waterExamplesmelting, sugar?
  6. Fill in the missing step in the labor decision. Choose from: compare the savings with the extra transport; build next to the market.

    The chain of the labor decision with the third box replaced by a question mark.Start at the least-cost siteFind a site with cheap labor?Move if savings are larger
  7. A chip-design company opens offices in a big city far from any raw material. Explain why Weber's model does not explain this choice and what does.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

Who was Alfred Weber?

Alfred Weber (1868 to 1958) was a German economist. His 1909 book on the location of industries was translated into English as “The Theory of the Location of Industries” in 1929.

What is the difference between localized and ubiquitous materials?

Localized materials, such as iron ore or coal, are found only in certain places and must be carried to the factory. Ubiquitous materials, such as water or air, are available almost everywhere and do not pull the factory in any direction.

What is an isodapane?

An isodapane is a line joining places with the same total transport cost. The critical isodapane marks how far a factory can move from the least-cost site before the extra transport cost uses up the savings from cheaper labor.

Is Weber's theory still used today?

Yes, for heavy industries where transport is a large share of costs, such as cement, steel and sugar. For light, high-value industries the model explains little, because skills, research and markets matter more than the weight of materials.

How is Weber's theory different from von Thünen's model?

Both rest on transport costs. Von Thünen asked which crop a given piece of farmland should grow; Weber asked where a given factory should be built.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.