- Production costs and the firm
Why is the average cost curve U-shaped?
The average total cost curve is U-shaped because two forces pull on it. At low output, spreading the fixed cost over more units makes the cost per unit fall. At higher output, diminishing marginal returns make each extra unit cost more, and that pulls the average up. Marginal cost crosses average total cost at its lowest point.
The topic explained
Three averages
Dividing each kind of cost by output gives the cost per unit. Average fixed cost is , average variable cost is , and average total cost is their sum, .
Take a juice plant whose total cost is thousand shekels, where is output in hundreds of crates (numbers made up for this page). Its fixed cost is 200. At an output of 10, , and ; at 20, ; at 40, again. The average falls and then rises: a U.
Two forces pull on the average
The first force is spreading the fixed cost. The same 200 is shared by more units as output grows, so average fixed cost falls all the way: 20, 10, about 6.67, 5. At low output this force wins, and the average falls fast.
The second force is diminishing marginal returns. With the plant fixed, each extra worker adds less output, so each extra unit costs more and average variable cost rises: 7, 12, 17, 22. At high output the savings from spreading the fixed cost become small, the rising variable cost wins, and the average turns up. The bottom of the U is where the two forces balance: here at 20, with an average cost of 22.
Why marginal cost crosses at the minimum
Think of a student whose average grade is 80. A next test below the average, 70, pulls it down to 78; a test above it, 90, pulls it up to 82. Costs follow the same arithmetic. When the cost of the next unit, marginal cost, is below the average, producing it lowers the average; when it is above, it raises it.
In the plant, . At an output of 10, marginal cost is 12, well below the average of 27, so the average is falling. At 30 it is 32, above the average of about 23.67, so the average is rising. The switch happens where they are equal: at 20, . That is why on every correct drawing the marginal cost curve passes through the lowest point of the average cost curve.
Common mistakes
Drawing marginal cost crossing the average to the left or right of its minimum. Thinking the bottom of the U is always the best output: the output that maximizes profit depends on the price, not only on cost. And confusing this short-run U with the long-run curve, whose shape comes from economies and diseconomies of scale, not from fixed costs and diminishing returns.
Practice: the average cost curve
For 11th grade economics students. Use the tables and the chart on the sheet, show each calculation, then check against the answers.
Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.
Write the formulas for average fixed, average variable and average total cost.
A firm's total cost is . Fill in average total cost in the table.
For the same firm, marginal cost is . Find marginal cost at an output of 10 and explain what it shows.
Use the chart. At what output is average total cost lowest, and which curve passes through that point?
Fill in the table: is average total cost falling, at its minimum, or rising?
Why does average fixed cost keep falling while average variable cost rises?
Write a short paragraph: why must the marginal cost curve cut the average total cost curve at its lowest point?
Common questions
What is the difference between average cost and marginal cost?
Average total cost is total cost divided by all units produced. Marginal cost is the extra cost of the last unit. Marginal cost pulls the average down when it is below it and up when it is above it.
Why does average fixed cost always fall?
Because the same fixed sum, such as rent, is divided by a larger output. It gets smaller and smaller but never reaches zero.
Is the minimum of average cost the best output for the firm?
Not necessarily. A firm maximizing profit compares price with marginal cost; the lowest average cost tells only where each unit is cheapest to make.
Does the long-run average cost curve have the same reason for its shape?
No. In the long run there are no fixed costs; the long-run curve falls with economies of scale and rises with diseconomies of scale.
How do you find the minimum of average cost from a table?
Compute average total cost at each output and find the smallest, or look for the output where marginal cost equals average total cost.

Still have a question? Ask Lessi
Any question about this subject. Lessi answers right here, step by step.
Try asking
Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.
Learn it with a teacher
Learn this topic live with Lessi
Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.