• Communications: models of communication and signs

What is the Shannon-Weaver model of communication?

Written with AI (How we create content)Target level: Grade 10Last updated: Report an error
Quick answer

The Shannon-Weaver model describes communication as a signal sent from an information source through a transmitter, a channel and a receiver to a destination, while a noise source distorts the signal on the way. Claude Shannon published it in 1948 for telephone engineering, and Warren Weaver applied it to human communication in their 1949 book. It is linear: it has no feedback.

The topic explained

A model built for the telephone

The Shannon-Weaver model of communication began as engineering. Claude Shannon, a mathematician at Bell Telephone Laboratories, published A Mathematical Theory of Communication in 1948 to work out how much information a line could carry and how to protect it from interference. In 1949 he and Warren Weaver published it as a book, and Weaver's essay argued that the same scheme fits all human communication.

The model has five parts and a sixth that spoils them. The information source chooses a message. The transmitter turns it into a signal (encoding). The signal travels along a channel. The receiver turns it back into a message (decoding), and the message reaches its destination. Along the channel a noise source adds things the source never sent. A made-up phone call: Noa (source) speaks into her phone (transmitter), the voice travels as a signal over the network (channel), Dan's phone (receiver) turns it back into sound, and Dan (destination) hears it, along with a crackle on the line (noise).

The Shannon and Weaver model from top to bottom: source, transmitter, the channel carrying the signal, receiver and destination, with a noise source beside the channel and an arrow into the signal.SourceTransmitterReceiverDestinationChannel: the signalNoise source
Shannon, 1948; Shannon and Weaver, 1949.

Noise, and how to beat it

For Shannon, noise is anything added to the signal that the source did not intend. Communication textbooks widen the idea into three kinds. Technical noise affects the signal itself: static, a dropped call, a loud room. Semantic noise is in the meaning: a word or a piece of jargon the receiver does not know or understands differently. Psychological noise is in the receiver's mind: tiredness, anger, a prejudice against the speaker. The three-way division is the textbooks', not Shannon's; for him noise was physical.

The defense against noise is redundancy: sending more than the bare minimum, so that a lost part can be rebuilt. Repeating a phone number, spelling a name with code words (B as in Bravo) or adding a picture to a message are redundancy. Its price is that the same channel carries less new information in the same time.

Table of three kinds of noise: technical, such as static or a dropped call; semantic, such as a word the listener does not know; psychological, such as a tired or angry listener.Kind of noiseMade-up exampleTechnicalStatic, a dropped callSemanticA word the listener lacksPsychologicalA tired or angry listener
The three-way division is the textbooks', not Shannon's.

Weaver's three levels

Weaver divided the problems of communication into three levels. Level A, technical: how accurately can the symbols be sent? Level B, semantic: how precisely do the symbols carry the meaning that was intended? Level C, effectiveness: how far does the meaning that arrives change the receiver's behavior in the way the sender wanted? Shannon's mathematics answers only level A. A perfect signal can still fail at B, if the listener misunderstands, or at C, if he understands and does nothing.

Shannon's work also gave the world the bit, the basic unit of information, a word he credited to his colleague John Tukey; every digital file and network today rests on his theory.

Weaver's three levels from top to bottom: level A, technical, did the signal arrive; level B, semantic, was it understood; level C, effectiveness, did it change behavior.A, technical: did it arrive?B, semantic: understood?C, effect: did it work?
Weaver, 1949: Shannon's mathematics deals with level A.

What the model leaves out

The model is linear: the destination never answers, so there is no feedback, which later models such as Wilbur Schramm's added. Critics also say it treats meaning like a parcel that is packed, shipped and unpacked unchanged, while in human communication the receiver builds the meaning from his own language and experience. The model is strongest where it began, in the technical transmission of signals, and weakest at levels B and C.

A strong exam answer names the five parts and noise, applies them to an example, gives one kind of noise, and adds a limit, such as the missing feedback.

Free printable worksheet

Practice: the Shannon-Weaver model

For 10th grade communications students. The calls and messages are made up. Answer from what is printed here, then check yourself against the answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: the Shannon-Weaver modelName:
  1. Name the missing part of the model in the diagram and say what it does.

    The Shannon and Weaver model from top to bottom: source, transmitter, the channel carrying the signal, receiver and destination, with a noise source beside the channel and an arrow into the signal.Source?ReceiverDestinationChannel: the signalNoise source
    Shannon, 1948; Shannon and Weaver, 1949.
  2. A teacher gives a lesson by video call. Match each part of the model: the teacher, her laptop's microphone and camera, the internet connection, the student's laptop, the student.

  3. In the same video lesson the picture freezes, the teacher uses a term the student has never heard, and the student is worried about a test in the next lesson. Write the kind of noise for each.

  4. Fill in the missing row of the table: give the kind of noise and a made-up example.

    Table of three kinds of noise: technical, such as static or a dropped call; semantic, such as a word the listener does not know; psychological, such as a tired or angry listener.Kind of noiseMade-up exampleTechnicalStatic, a dropped call??PsychologicalA tired or angry listener
    The three-way division is the textbooks', not Shannon's.
  5. What is redundancy, and why does a pilot spell a call sign with code words (A as in Alpha) over the radio?

  6. Fill in the missing level, and explain why a message can succeed at level A and fail at level C.

    Weaver's three levels from top to bottom: level A, technical, did the signal arrive; level B, semantic, was it understood; level C, effectiveness, did it change behavior.A, technical: did it arrive??C, effect: did it work?
    Weaver, 1949: Shannon's mathematics deals with level A.
  7. Which part of the model is the noise source in the diagram attached to, and why there?

    The Shannon and Weaver model from top to bottom: source, transmitter, the channel carrying the signal, receiver and destination, with a noise source beside the channel and an arrow into the signal.SourceTransmitterReceiverDestinationChannel: the signalNoise source
    Shannon, 1948; Shannon and Weaver, 1949.
  8. Was the model right to treat human communication like a telephone line? Write a short answer with one argument for and one against.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What is noise in the Shannon-Weaver model?

Anything added to the signal on the way that the source did not send, such as static on a phone line. Communication textbooks extend it to semantic noise (misunderstood words) and psychological noise (the receiver's state of mind).

What is the difference between the transmitter and the source?

The source is whoever chooses the message, such as a person speaking. The transmitter is what turns that message into a signal that can travel, such as the microphone and the phone. In face-to-face talk, the speaker's voice serves as the transmitter.

Why is the Shannon-Weaver model called linear?

Because the message moves in one direction, from the source to the destination, and the destination never answers. Models from the 1950s, such as Schramm's, added feedback and drew communication as a circle.

Who were Shannon and Weaver?

Claude Shannon was a mathematician and engineer at Bell Telephone Laboratories whose 1948 paper founded information theory. Warren Weaver, a scientist and science administrator, wrote the essay in their 1949 book that applied the model to human communication.

What are Weaver's three levels of communication problems?

Level A, technical: are the symbols sent accurately? Level B, semantic: do they carry the intended meaning? Level C, effectiveness: does the meaning change behavior as intended? Shannon's theory deals with level A.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.