• Geography: climate, weather and water in Israel

What is seawater intrusion?

Written with AI (How we create content)Target level: Grade 11Last updated: Report an error
Quick answer

Seawater intrusion is the movement of salt water from the sea into a coastal aquifer, the fresh groundwater under the land. Fresh water floats on the heavier seawater, and as long as the water table stays above sea level it holds the salt water back. When people pump more than rain replaces, the water table falls, the salt water moves inland and upward, and wells near the coast turn salty.

The topic explained

Fresh water floating on salt water

Under a coast the ground holds two kinds of water. Rain that soaks in becomes fresh groundwater and flows slowly toward the sea; deeper down, seawater fills the pores of the same sand and rock. Fresh water is a little lighter than seawater, 1.000 against about 1.025 grams per cubic centimeter, so it floats on top of it like a lens, and the boundary between them is called the interface. Seawater intrusion is what happens when that interface moves inland or upward, so that salt water takes the place of fresh water in the aquifer.

A common misreading is that intrusion means the sea flooding the land. Nothing happens on the surface. The change is tens of meters underground, and the first sign is often a well whose water slowly grows saltier year after year.

Schematic cross-section of a coast from west to east: the sea on the left; under the land a layer of fresh groundwater lies above salt water, separated by a sloping interface that gets deeper inland; the water table stands a little above sea level.seafresh groundwatersalt waterinterfacewater tablewesteast
Schematic, not to scale: the real interface lies tens of meters down.

The 40 to 1 rule

Because the two densities differ so little, a small height of fresh water above sea level balances a deep column of it below. The Ghyben-Herzberg rule, named after two scientists of around 1900, says that for every meter the water table stands above sea level, fresh water reaches about 40 meters below sea level. The 40 comes from the densities: 1.000÷(1.025−1.000)=401.000 \div (1.025 - 1.000) = 40.

The rule works in both directions, and that is what makes it a warning. If pumping lowers the water table from 2 meters to 1.5 meters above sea level, the fresh water that reached 80 meters down now reaches only 60. Half a meter lost at the top costs 20 meters at the bottom.

A straight line graph: for every meter the water table stands above sea level, fresh water reaches 40 meters below sea level, so 1 meter gives 40 meters and 2 meters give 80 meters.water table (m)fresh water depth (m)122040608010001 m → 40 m2 m → 80 m
The Ghyben-Herzberg rule, from the densities of fresh water and seawater.

How pumping lets the sea in

A well pulls the water table down around itself in a dip. By the 40 to 1 rule the interface rises beneath it, in a cone of salt water that can reach the bottom of the well; geologists call this upconing. When many wells pump more than rain puts back, the water table falls across the whole coast and the interface creeps inland.

Israel's coastal aquifer shows both sides of this. According to Hebrew Wikipedia, it runs about 120 km along the coast from the Carmel to the Gaza Strip, 7 to 20 km inland and 160 to 180 meters thick, in sand, sandstone and kurkar, and most of Israel's people live above it. Overpumping and pollution have closed many of its wells since the 1990s, and every new road and roof lets less rain soak in to push back the sea.

Schematic cross-section of the same coast with a pumping well: the water table dips around the well, and the salt water interface rises in a cone beneath it and lies higher inland than before.seafresh groundwatersalt waterinterfacewater tablewesteastpumping well
Schematic, not to scale: the real interface lies tens of meters down.

Protecting a coastal aquifer

The answers follow from the rule: keep the water table high. Pumping less is the simplest and the hardest, because the water is needed. Wells can be moved inland, away from the interface. Fresh water can be put back: flood water is led into infiltration ponds, and at the Shafdan in the Dan region treated wastewater soaks through sand into the aquifer before it is pumped again for farming. Some coasts inject fresh water into a line of wells to build a barrier against the sea. And desalinated seawater lets a country take less from the ground. On the bagrut, name the measure, say which part of the chain it breaks and give its cost.

Table of four ways to protect a coastal aquifer: pump less, move wells inland away from the salt water, recharge the aquifer and desalinate, each with how it helps and its limit.MeasureHow it helpsLimitPump lesskeeps level highless waterMove wellsaway from saltlonger pipesRechargeadds fresh waterneeds pure waterDesalinatereplaces pumpingenergy, cost
Free printable worksheet

Practice: seawater intrusion

For 11th grade geography students. Use the cross-sections, graph and tables printed on the sheet to answer each question, then check your answers.

Free, no sign-up. The answer key prints on the second page. Regenerating a new worksheet on the same topic needs a free account.

Free printable worksheetlessoons.com
Practice: seawater intrusionName:
  1. Write the name of each part of the cross-section marked A to D.

    The schematic cross-section of the coast with four labels replaced by the letters A to D: A in the layer under the land, B in the deep layer under the sea, C on the sloping boundary and D just above the line under the land surface.seaABCDwesteast
  2. Use the rule z=40hz = 40h. If the water table stands 2.5 meters above sea level, how deep does the fresh water reach? Check your answer against the second point on the graph.

    The straight line graph of the 40 to 1 rule, with two unlabeled points, at 1 meter and 40 meters and at 2.5 meters and 100 meters.water table (m)fresh water depth (m)12204060801000
  3. A farmer's well reaches 70 meters below sea level, where the water table is 2 meters above sea level. After years of pumping the water table stands at 1.5 meters. Will the well still give fresh water? Calculate.

  4. Fill in the missing step in the chain of seawater intrusion.

    Four boxes from top to bottom joined by arrows: pumping exceeds rain, a question mark, the interface rises, and wells turn salty.Pumping exceeds rain?Interface risesWells turn salty
  5. Explain what is happening under the pumping well in the cross-section, and why moving the well inland would help.

    The schematic cross-section with a pumping well: the water table dips around the well and the salt water rises in a cone beneath it.seafresh groundwatersalt waterinterfacewater tablewesteastpumping well
  6. Fill in the two hidden cells of the table.

    The table of ways to protect a coastal aquifer with two cells hidden: how recharge helps, and the limit of desalination.MeasureHow it helpsLimitPump lesskeeps level highless waterMove wellsaway from saltlonger pipesRecharge?needs pure waterDesalinatereplaces pumping?
  7. A town on the coastal plain plans a large new neighborhood on open sandy land above the aquifer. Explain how this could affect seawater intrusion and suggest one way to reduce the harm.

More topics and worksheets at lessoons.com© 2026 Lessons

Common questions

What is the difference between seawater intrusion and salinization?

Salinization is any rise in the salt content of water or soil. Seawater intrusion is one cause of it: seawater entering a coastal aquifer. Groundwater can also turn salty from irrigation water that evaporates, from salty rock layers or from sewage.

Can a salty aquifer become fresh again?

Yes, but slowly. If pumping is cut and fresh water is recharged, the water table rises and the interface moves back toward the sea. Groundwater moves slowly through sand and rock, and the salt has to be flushed out by fresh water, so recovery can take years or decades.

Why does sea level rise make intrusion worse?

The 40 to 1 rule depends on the height of the water table above the sea. If the sea rises and the water table does not, the fresh water above sea level is thinner, so the interface rises and moves inland.

What is the coastal aquifer in Israel?

The coastal aquifer is the layer of sand, sandstone and kurkar under the coastal plain that holds fresh groundwater. It runs about 120 km from the Carmel to the Gaza Strip and is fed mainly by rain, according to Hebrew Wikipedia.

Why is the Ghyben-Herzberg rule only an approximation?

It assumes still water and a sharp boundary. In reality groundwater flows toward the sea and fresh and salt water mix in a zone that can be meters thick, so the real interface is a little shallower and blurrier than the rule predicts.

Still have a question? Ask Lessi

Any question about this subject. Lessi answers right here, step by step.

Try asking

Asking needs a free account; your question is kept while you sign up. Answers are written by AI and can contain mistakes. Lessi doesn’t give medical or legal advice.

Learn it with a teacher

Learn this topic live with Lessi

Lessi, the AI teacher, explains it out loud on a board, with short quizzes, at your pace. The first 60 minutes are free.