# What is a hub-and-spoke system?

> Written with AI · [Geography: tourism and transport](https://lessoons.com/en/tourism-and-transport) · Grade 10 · 2026-11-14 · https://lessoons.com/en/tourism-and-transport/what-is-a-hub-and-spoke-system

A hub-and-spoke system is a transport network in which outlying places are linked not to each other but to one central hub, like the spokes of a wheel. Passengers or parcels travel to the hub and change there for their destination. It links many places with few routes: 10 airports need only 9 routes through a hub, against 45 if every pair had a direct flight.

## The topic explained

### A wheel of routes

Imagine a bicycle wheel: the spokes run from the rim to the center and never touch each other. In a hub-and-spoke system the outlying places, the spokes, are joined only to a central hub. A traveler from one spoke to another goes in to the hub and out again, usually changing planes, trains or trucks there.

Airlines made the model famous. According to Wikipedia, Delta Air Lines pioneered it in 1955 at its hub in Atlanta. In the mid-1970s FedEx used it to deliver parcels overnight, flying them all to one sorting hub and out again. After the United States deregulated air travel in 1978, many airlines copied Delta. Atlanta's airport, still Delta's main hub, has been the busiest in the world by passengers almost every year since 1998.

### The alternative: point to point

In a point-to-point network every place has a direct route to every other place. That sounds ideal for the passenger: no changes, no detours. The problem is the number of routes. With 6 airports, every pair needs its own line, 15 in all. With 10 airports it is 45, and with 20 it is 190.

A common misreading is that point-to-point is always faster. For each traveler it usually is, but many of its routes carry too few passengers to fill a plane every day, so flights are rare, small or not worth running at all.

### Counting the routes

The difference can be calculated. A full point-to-point network of n airports needs (n(n-1))/2 routes, because each of the n airports links to the other n - 1, and each route is counted twice. A hub-and-spoke network with one hub needs only n - 1 routes, one from the hub to each other airport. For 10 airports that is 9 routes instead of 45.

The graph shows why airlines love hubs. The point-to-point curve rises ever more steeply as airports are added, while the hub line rises slowly and straight. Fewer routes mean the passengers of many cities share the same planes, so the planes are fuller and flights can be more frequent. Where the hub lies matters too. A hub works best near the middle of the network, so the detour through it is short, and in a city that itself produces many passengers, so the planes arriving there are already partly full. That is a question of location, and so a question for geographers.

### The costs of a hub

The savings have a price. Passengers must change planes and sometimes wait, and the trip is longer than a straight line. Everything depends on the hub: a storm, a strike or a jam there delays flights across the whole network. The hub airport itself becomes crowded at peak times, when many flights arrive and leave together so passengers can connect. The city that hosts a hub gains jobs and direct flights to many places, which is why cities compete to become hubs. An airline can also mix the two, with a hub for most routes and direct flights where demand is high. On the bagrut, describe the two network types, compare them with numbers and explain why some cities become hubs.

## Practice: hub-and-spoke systems

For 10th grade geography students. Use the networks, graph and table printed on the sheet to answer each question, then check your answers.

1. **What is the airport marked with a question mark called, and how does a passenger travel from airport B to airport D in this network?** — It is the hub. The passenger flies from B to the hub, changes planes, and flies from the hub to D: two flights.
2. **Count the lines in the point-to-point network of 6 airports, and check your count with the formula (n(n-1))/2.** — There are 15 lines. (6 × 5)/2 = 15.
3. **Read the two points at 8 airports on the graph. How many routes does each network need, and what is the difference?** — Point-to-point: (8 × 7)/2 = 28 routes. Hub-and-spoke: 8 - 1 = 7 routes. The difference is 21 routes.
4. **An airline serves 20 airports. How many routes would it need in a full point-to-point network, and how many with one hub?** — Point-to-point: (20 × 19)/2 = 190 routes. Hub-and-spoke: 20 - 1 = 19 routes.
5. **Fill in the two hidden cells of the table.** — Hub-and-spoke trips: passengers change planes at the hub. The weak point of point-to-point: many thin routes with too few passengers to fill frequent flights.
6. **Explain why a snowstorm at a hub airport can delay flights in cities hundreds of kilometers away where the weather is fine.** — In a hub-and-spoke network the flights of many cities pass through the hub. If planes cannot land or take off there, the planes, crews and connecting passengers bound for other cities are stuck, and the delays spread along every spoke.
7. **A city tries to persuade an airline to make its airport a hub. Give two benefits the city hopes to gain and one cost it may bear.** — Benefits: jobs at the airport and in related services, and direct flights from the city to many destinations, which attract business and tourism. Cost: crowding, noise and traffic around the airport at peak times, and dependence on one airline's decisions.

## Common questions

### What is an airline hub?

An airline hub is an airport where an airline concentrates its flights so passengers from many cities can meet and change planes. Atlanta's airport, for example, is the main hub of Delta Air Lines.

### What is the difference between hub-and-spoke and point-to-point?

In hub-and-spoke, outlying places link only to a central hub, so most trips need a change there. In point-to-point, every place links directly to the others, which is faster per trip but needs far more routes.

### Who invented the hub-and-spoke system?

In air travel, Wikipedia credits Delta Air Lines with pioneering the model in 1955 at its Atlanta hub. FedEx later used it for parcels, and many airlines adopted it after United States air travel was deregulated in 1978.

### Is the hub-and-spoke model used outside airlines?

Yes. Parcel companies sort packages at central hubs, bus and rail networks often meet at a central station, and computer networks connect devices through a central switch in a star layout.

### Why do some airlines prefer point-to-point flights?

Point-to-point flights avoid the cost and crowding of running a hub and give passengers direct trips. They work best between pairs of cities with enough demand to fill flights.
