# How do you count bacteria in a sample?

> Written with AI · [Biotechnology: microbiology, bacteria, growth and fermentation](https://lessoons.com/en/microbiology) · Grade 10 · 2026-11-12 · https://lessoons.com/en/microbiology/how-do-you-count-bacteria-in-a-sample

To count bacteria in a sample, microbiologists dilute it step by step, usually tenfold each time, spread a small volume of each dilution on agar plates and count the colonies after incubation. Only a plate with 30 to 300 colonies is counted, and the count is multiplied back by the dilution: colony-forming units per mL = colonies ÷ (dilution × volume plated).

## The topic explained

### Too many to count, so count colonies

A single drop of a culture can hold millions of bacteria, far too many and too small to count one by one. So microbiologists let each living cell count itself. Spread on a plate of nutrient agar and kept warm overnight, every cell that can divide grows into a colony, a spot of millions of cells that you can see without a microscope. Count the spots and you know how many living cells were spread.

The result is given in colony-forming units, CFU, not in cells. Two cells stuck together grow into one colony, so a CFU stands for whatever started a colony. A count of 156 CFU means at least 156 living cells, perhaps a few more.

### Serial dilution, step by step

Spread the undiluted culture and the plate becomes one solid lawn. So the sample is first diluted in a serial dilution. Move 1 mL of sample into 9 mL of sterile liquid: the new tube is diluted 1:10, or 10⁻¹. Mix, and move 1 mL of that into the next 9 mL: now 10⁻². Each step divides by ten again, and the dilutions multiply: after five tubes the last one is 10⁻⁵, one hundred thousand times weaker than the sample.

Then a small, measured volume, often 0.1 mL, from several tubes is spread on separate plates. A common mistake is to add the dilutions instead of multiplying them: three tenfold steps give 10⁻³, a thousandfold dilution, not thirtyfold.

### Choosing the plate and calculating

Only a plate with 30 to 300 colonies is counted. With fewer, chance has too large an effect on the number; with more, the colonies crowd each other and merge. Say three plates of 0.1 mL each give 1,560 colonies at 10⁻⁴, 156 at 10⁻⁵ and 16 at 10⁻⁶. Only the 10⁻⁵ plate is in range.

Now work back to the sample. Divide the colonies by the dilution and by the volume spread:

CFU/mL = 156/(10⁻⁵ × 0.1) = 1.56 × 10⁸

### Reading the plates, and other ways to count

Check your answer against the plates you did not count: a plate ten times more diluted should hold about a tenth as many colonies, and here 16 is close to a tenth of 156. Students often forget the volume: 0.1 mL is a tenth of a millilitre, so the count must be multiplied by 10 as well as by the dilution. A plate count finds only living cells that grow on that agar. A counting chamber under the microscope counts dead cells too, and the cloudiness of a culture, measured in a spectrophotometer, gives a fast estimate that is checked against plate counts.

## Practice: serial dilution and the plate count

For 10th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your work against the answers.

1. **What is the dilution in the tube marked with a question mark? Explain.** — 10⁻⁴. Each step moves 1 mL into 9 mL, a 1:10 dilution, and the dilutions multiply: 10⁻¹ × 10⁻¹ × 10⁻¹ × 10⁻¹ = 10⁻⁴.
2. **Why are results given in colony-forming units and not in cells?** — A colony can grow from a single cell or from a clump of cells stuck together, so the number of colonies counts the units that started colonies, not exactly the number of cells.
3. **Which plates should be counted? Fill in the last column and explain.** — 10⁻⁴, 1,560 colonies: no, too many to count accurately. 10⁻⁵, 156: yes, it is between 30 and 300. 10⁻⁶, 16: no, too few, so chance has too much effect.
4. **Using the plate you chose, calculate the CFU per mL of the original sample. 0.1 mL was spread on each plate.** — CFU/mL = 156 ÷ (10⁻⁵ × 0.1) = 1.56 × 10⁸ CFU per mL.
5. **A plate spread with 0.2 mL of a 1:10,000 dilution grew 95 colonies. How many CFU per mL were in the sample?** — 95 ÷ (10⁻⁴ × 0.2) = 95 × 10,000 ÷ 0.2 = 4,750,000, that is 4.75 × 10⁶ CFU per mL.
6. **Read the chart. Which plate is in the countable range, and how do the two counts check each other?** — The 10⁻⁵ plate, with 156 colonies, is between the lines at 30 and 300. The 10⁻⁶ plate, ten times more diluted, has 16, about a tenth of 156, as expected.
7. **A student counted 2 × 10⁸ cells per mL under the microscope but 1.5 × 10⁸ CFU per mL on plates. Give a reason for the difference.** — The microscope counts dead cells as well as living ones, while the plate count finds only living cells that can grow into colonies. Clumps of cells also give one colony each.

## Common questions

### Why is the countable range 30 to 300 colonies?

Below about 30 colonies, chance changes the count too much from one plate to the next. Above about 300, colonies crowd and merge and are hard to count. The range keeps the count both reliable and readable.

### What does TNTC mean on a plate?

TNTC stands for too numerous to count. It is written on a plate with far more than 300 colonies, which is not used in the calculation.

### Does a plate count find all the bacteria in a sample?

No. It finds only living cells that can grow on that medium at that temperature. Many bacteria in nature, and dead cells, do not form colonies, so other methods are used to count them.

### Why must the tubes be mixed between steps?

Bacteria settle and spread unevenly in a liquid. Without mixing, the 1 mL moved to the next tube may hold more or fewer cells than its share, and every later dilution carries the error.

### Where is the plate count used in real life?

It is used to check the quality of drinking water and of foods such as milk, to follow cultures in industry and research, and to test how well a disinfectant or a preservative works.
