# What units would be best suited for a measurement of 0.002m?

> Written with AI · [Measurement, Area and Perimeter](https://lessoons.com/en/measurement-and-geometry-g5) · Grade 5 · 2026-11-09 · https://lessoons.com/en/measurement-and-geometry-g5/how-to-choose-and-convert-metric-units-of-length

Millimeters (mm) are the units that would be best suited for a measurement of 0.002m, because multiplying 0.002 m by 1,000 gives an easy-to-read 2 mm (about the thickness of a coin). Use mm for tiny thicknesses, cm for handheld items, m for rooms, and km for long distances.

## The topic explained

### Why are millimeters best suited for a measurement of 0.002 m?

When you ask what units would be best suited for a measurement of 0.002 m, the answer is millimeters (mm). Because 1 m equals 1,000 mm, a length of 0.002 m is simply 2 mm, such as the thickness of a coin or a pencil tip. Choosing the unit that gives a small whole number instead of a string of zeros makes measurements clear and easy to compare.

In the metric system, four units handle everyday lengths: millimeters (mm) for objects thinner than a finger, centimeters (cm) for handheld items like a 15 cm pen, meters (m) for rooms and playgrounds, and kilometers (km) for travel distances between towns.

### How do you convert between mm, cm, m, and km?

Every metric length conversion uses a power of 10: 1 cm = 10 mm, 1 m = 100 cm = 1,000 mm, and 1 km = 1,000 m. To convert from a larger unit to a smaller unit, multiply by the factor (0.002 m × 1,000 = 2 mm, and 3.4 m × 100 = 340 cm).

To convert from a smaller unit to a larger unit, divide by the factor (480 mm ÷ 10 = 48 cm, and 2,800 m ÷ 1,000 = 2.8 km). Always convert mixed measurements to the same unit before adding or comparing them.

### How do you measure accurately to the nearest millimeter with a ruler?

Line up the printed 0 mark on the ruler — not the plastic end of the ruler — with the start of the object. Look straight down from above the end of the line so your reading is not shifted by viewing at an angle.

Read the whole centimeters first and count the small millimeter ticks past that mark. A line that reaches 8 cm and 6 small ticks is 8 cm 6 mm, which equals 8.6 cm or 86 mm.

## Choosing and Converting Metric Units of Length — Grade 5 Worksheet

Choose the most sensible metric unit for each measurement and complete the conversions.

1. **What metric unit is best suited for a measurement of 0.002 m, and what is the value in that unit?** — Millimeters (mm). Multiplying 0.002 × 1,000 gives 2 mm.
2. **Choose the best unit (mm, cm, m, or km) for: (a) the length of an ant, (b) the length of a pencil, (c) the height of a classroom door, (d) the distance between two cities.** — (a) mm, (b) cm, (c) m, (d) km.
3. **Convert 480 mm into centimeters (cm).** — 48 cm, because 480 ÷ 10 = 48.
4. **A running track is 400 m long. How many kilometers is 7 laps around the track?** — 7 × 400 m = 2,800 m, and 2,800 ÷ 1,000 = 2.8 km.
5. **What unit is best suited for a measurement of 0.05 m, and what is its value in that unit?** — Centimeters (cm). Multiplying 0.05 × 100 gives 5 cm (or 50 mm).
6. **Add these three board lengths and give the total in centimeters: 1.45 m, 85 cm, and 620 mm.** — 145 cm + 85 cm + 62 cm = 292 cm.

## Common questions

### Why is 0.002 m better written as 2 mm instead of 0.2 cm?

Both 2 mm and 0.2 cm equal 0.002 m, but 2 mm is a whole number with no decimal point. In science and measurement, choosing the unit that gives a small whole number reduces reading mistakes.

### How many millimeters are in 1 meter?

There are 1,000 millimeters in 1 meter, because 1 meter has 100 centimeters and each centimeter has 10 millimeters (100 × 10 = 1,000).

### Do I multiply or divide when converting meters to millimeters?

Multiply by 1,000. Because a millimeter is much smaller than a meter, it takes 1,000 times as many millimeters to cover the same length.

### Why should you start at the 0 mark instead of the edge of the ruler?

Most plastic and wooden rulers leave a 2 mm to 5 mm gap before the 0 line. Starting at the plastic edge adds that extra gap to your measurement.
