# How do you plan and test a working model?

> Written with AI · [Matter, Energy and Living Systems](https://lessoons.com/en/matter-energy-and-living-systems) · Grade 5 · 2026-11-18 · https://lessoons.com/en/matter-energy-and-living-systems/how-do-you-plan-and-test-a-working-model

To plan a working model, state the job it must do, choose a material for the property that matters, and decide which energy change will do the work. Then build it, test it fairly, find one weakness and improve it. A balloon car, for example, uses a light cardboard body and the energy of stored air to travel 2 meters. This is taught in 5th grade science.

## The topic explained

### Start with the job

Every working model has a job to do. Write it as one sentence you can check, such as: travel 2 meters on its own. Then plan three things: the material, the energy change, and how you will test.

In the example in the table, the job is a car that travels 2 meters without being pushed, and the car is powered by a balloon.

### Choose the material by its property

Do not pick a material because it looks good. Pick it for the property that matters for the job. A car body must be light, so that the small push from the balloon can move it, and stiff, so that it does not bend.

Cardboard is light and stiff. A metal sheet is too heavy, and a wet sponge is too floppy. Say the property in your reason: it is light, so the balloon can move it.

### Decide the energy change

A model needs energy to do work. In the balloon car, the stretched balloon holds air that is squeezed. When the air is let out, it pushes backward, and the car is pushed forward. Stored energy changes to movement.

Some energy also changes to sound and a little heat. Tracing the energy change helps you check that your model really has a way to do its job.

### Test, find a weakness, improve

Build the model and test it. A fair test changes one thing at a time and measures the same way each time. In this made-up test the car travels 120 cm and then 130 cm, which is not enough for 2 meters.

Look for one weakness. The wheels rub the body, which wastes energy. Fix it by leaving a wider gap, and test again. After the fix the car goes 210 cm, so the job is done. The table lists other weaknesses and their fixes.

## Plan and test a working model (5th grade)

For 5th graders. Look at each picture and fill in what is missing.

1. **Fill in the plan for the balloon car.** — The job: travel 2 m on its own. Material: light cardboard body. Property: light and stiff. Energy change: stored air to movement.
2. **Which materials are good for the car body, and why?** — Cardboard is good because it is light and stiff. Metal sheet is too heavy. A wet sponge is too floppy.
3. **Fill in the two missing steps of the energy change.** — The air is pushed out, and the car is pushed forward.
4. **How far did the car go after the fix, and how much farther is that than the second try?** — 210 cm after the fix. That is 80 cm farther than the second try, because 210 minus 130 is 80.
5. **Fill in an improvement for each weakness.** — Wheels rub: leave a wider gap. Rough axle: use a smooth straw. Too heavy: use thinner cardboard.
6. **Why is it a fair test to change only one thing at a time?** — Then you know which change made the difference.
7. **Plan your own small device. Write the job, a material and its property, and the energy change.** — Many answers are right, for example a hand fan: the job is to move air, the material is stiff card, and the energy change is from your arm movement to moving air.

## Common questions

### What is a working model?

A working model is a small device that really does a job, such as a balloon car that travels. It is built from a plan and improved by testing.

### How do you choose the right material?

Think about the property the job needs, such as light, stiff, waterproof or strong, and choose a material that has it. Then explain your choice with that property.

### What is a fair test?

A fair test changes only one thing at a time and measures in the same way each time, so you can tell which change caused the result.

### Why does a balloon car move?

Air rushes out of the balloon backward and pushes the car forward. The energy stored in the stretched balloon and squeezed air changes into movement.

### What comes after this in science?

Children continue in 6th grade with Earth and space, including the shape of Earth, day and night, the seasons and the Moon.
