# Mathematics, four units – 11th Grade

> Written with AI · Grade 11 · 2026-11-09 · https://lessoons.com/en/maths-four-units

To find the first term and the common difference, divide the difference between the two term values by the difference between their positions: d = (a_(k) - a_(m))/(k - m). The four unit syllabus as it is actually examined: arithmetic and geometric sequences, trigonometry in any triangle, the differential and integral calculus of polynomials, and probability up to the binomial experiment.

## Lessons in this topic (in learning order)

1. [How do you find the first term and the common difference from two given terms?](https://lessoons.com/en/maths-four-units/arithmetic-sequences) (Grade 11) — To find the first term and the common difference, divide the difference between the two term values by the difference between their positions: d = (a_(k) - a_(m))/(k - m). Then substitute d and either term into aₙ = a₁ + (n - 1)d and solve for the first term a₁.
2. [When does an infinite geometric sequence have a finite sum?](https://lessoons.com/en/maths-four-units/geometric-sequences) (Grade 11) — An infinite geometric sequence has a finite sum only when the common ratio satisfies |q| < 1, with q ≠ 0. Then the terms shrink toward zero fast enough for their infinite total to converge to the first term divided by one minus the ratio: S = (a₁)/(1 - q). If |q| ≥ 1, no finite sum exists.
3. [When do you use the sine rule and when the cosine rule?](https://lessoons.com/en/maths-four-units/the-sine-and-cosine-rules) (Grade 11) — Use the sine rule when you know a matching pair, a side and the angle opposite it, plus one more side or angle: a/(sin A) = b/(sin B). Use the cosine rule, a² = b² + c² - 2bccos A, when there is no complete pair: two sides and the angle between them (SAS), or all three sides (SSS).
4. [How do you solve trigonometry questions in a trapezium or pyramid?](https://lessoons.com/en/maths-four-units/trigonometry-in-quadrilaterals-and-solids) (Grade 11) — To solve trigonometry in a trapezium or pyramid, add an auxiliary line that isolates a triangle. In a trapezium, drop a height or draw a diagonal. In a pyramid, join the apex, the center of the base and a base vertex. Then name the triangle and apply sin, cos, tan or the Pythagorean theorem, a² + b² = c².
5. [What is the order of operations in a full investigation of a polynomial?](https://lessoons.com/en/maths-four-units/investigating-a-function-with-the-derivative) (Grade 11) — The standard order of operations in a full investigation of a polynomial is: state the domain, find the axis intercepts, compute f'(x), solve f'(x) = 0, classify each stationary point with a sign table of f'(x), state the intervals of increase and decrease, and sketch the graph from those results.
6. [How do you find the largest area you can fence with a given length of fence?](https://lessoons.com/en/maths-four-units/extreme-value-problems) (Grade 11) — To find the largest area with a fixed length of fence, write the area as length times width. Use the perimeter to express one side in terms of the other, so the area is a function of one variable, such as A(x) = x(20 - x). Then solve A'(x) = 0, check that it is a maximum, and substitute back.
7. [How do you find the area enclosed between two graphs?](https://lessoons.com/en/maths-four-units/integrals-and-area-between-graphs) (Grade 11) — You find the area enclosed between two graphs by integrating the upper function minus the lower one over their shared interval: ∫_(a)^(b) (f(x) - g(x))dx. First set the two equations equal to find the intersection points, which are the limits a and b. Then check which curve is higher on that interval and evaluate the definite integral.
8. [What changes in the calculation when you draw without replacement?](https://lessoons.com/en/maths-four-units/probability-and-the-binomial-experiment) (Grade 11) — When you draw without replacement, the total count drops by one after every pick, so the denominator falls by one each time. If the item drawn is of the kind you are tracking, the numerator falls by one too: 5/8 becomes 4/7. Because earlier draws change later ones, the draws are dependent, not independent.

## Frequently Asked Questions

### How do you find the first term and the common difference from two given terms?

To find the first term and the common difference, divide the difference between the two term values by the difference between their positions: d = (a_(k) - a_(m))/(k - m). Then substitute d and either term into aₙ = a₁ + (n - 1)d and solve for the first term a₁.

### When does an infinite geometric sequence have a finite sum?

An infinite geometric sequence has a finite sum only when the common ratio satisfies |q| < 1, with q ≠ 0. Then the terms shrink toward zero fast enough for their infinite total to converge to the first term divided by one minus the ratio: S = (a₁)/(1 - q). If |q| ≥ 1, no finite sum exists.

### When do you use the sine rule and when the cosine rule?

Use the sine rule when you know a matching pair, a side and the angle opposite it, plus one more side or angle: a/(sin A) = b/(sin B). Use the cosine rule, a² = b² + c² - 2bccos A, when there is no complete pair: two sides and the angle between them (SAS), or all three sides (SSS).

### How do you solve trigonometry questions in a trapezium or pyramid?

To solve trigonometry in a trapezium or pyramid, add an auxiliary line that isolates a triangle. In a trapezium, drop a height or draw a diagonal. In a pyramid, join the apex, the center of the base and a base vertex. Then name the triangle and apply sin, cos, tan or the Pythagorean theorem, a² + b² = c².

### What does Mathematics, four units for 11th Grade cover?

The four unit syllabus as it is actually examined: arithmetic and geometric sequences, trigonometry in any triangle, the differential and integral calculus of polynomials, and probability up to the binomial experiment. The unit includes 8 ordered lessons covering Arithmetic sequences and the sum of the first terms, Geometric sequences, the common ratio and the infinite sum, The sine rule and the cosine rule in a triangle that is not right angled, Trigonometry inside quadrilaterals and solids.
