# What is GIS?

> Written with AI · [Maps and Geographic Information Systems](https://lessoons.com/en/maps-and-gis) · Grade 10 · 2026-11-11 · https://lessoons.com/en/maps-and-gis/what-is-gis

GIS, a geographic information system, is a computer system that stores data about places in layers, roads, buildings, heights, flood zones, each tied to its location, so that the layers line up. By laying them over one another it answers questions about where: where to build a school, who lives within reach of a hospital, which streets will flood.

## The topic explained

### A map made of layers

A geographic information system (GIS) is a computer system for collecting, storing, analyzing and showing data that has a location. Its basic idea is the layer: one kind of information for one area, such as the roads, the buildings, the height of the land or the zones that flood. Every item in a layer carries coordinates, so all the layers of an area line up exactly, like transparent sheets laid one on top of another.

A paper map shows one fixed picture. A GIS keeps the data apart and lets you choose which layers to show and which to compare. Israel's government map site, GovMap, run by the Survey of Israel, works this way: over an aerial photo you can switch on land parcels, zoning plans, schools or bus routes.

### Vector and raster

A GIS stores data in two ways. Vector data are shapes defined by coordinates: points (a well, a school), lines (a road, a stream) and polygons (a field, a neighborhood, a lake), each with a table of attributes, such as a school's name and number of pupils. Raster data are a grid of square cells, each holding one value: the color of a satellite image, the height of the ground, the temperature.

Each suits different things. Borders and roads are sharp, so they are vector; height and rainfall change gradually, so they are raster. A raster's detail depends on its cell size: with 30 m cells, a square 3 km across holds 100 by 100, that is 10,000 cells, and anything smaller than a cell disappears.

### Answering where: overlay and buffers

The power of a GIS is analysis. In an overlay, layers are combined to find the places that meet several conditions at once. To choose a site for a new school, a planner might keep only land that is near homes with children, more than 1 km from an existing school, outside a flood zone and publicly owned. A buffer is a zone of a set distance around something: a 1 km buffer around a point covers π × 1² ≈ 3.14 km².

The idea is older than computers. In 1854 the physician John Snow marked the deaths in a cholera outbreak in London on a street map and saw them cluster around one water pump. In the 1960s Roger Tomlinson led the Canada Geographic Information System, usually counted as the first computer GIS.

### What to watch for

A GIS is only as good as its data: an old or wrong layer gives a confident wrong answer. A common mistake is to think GIS is just a digital map; the map is the output, and the analysis of layers is the point.

## Practice: GIS

For 10th grade geography students. Use the diagrams and the table printed on the sheet, answer each question, then check your work against the answers.

1. **In your own words, what is a layer in a GIS? Name the two missing layers in the stack.** — A layer is one kind of information about one area, tied to coordinates so that it lines up with the other layers. The missing layers, from the bottom: elevation (second) and buildings (fourth).
2. **Would you store each of these as vector or raster data: (a) the route of a bus line; (b) the height of the ground across Israel; (c) the border of a nature reserve; (d) a satellite photo?** — (a) Vector, a line. (b) Raster, a value in each cell. (c) Vector, a polygon. (d) Raster, a color in each cell.
3. **A planner uses an overlay to find a site for a new school. Complete the conditions for the last two layers.** — Flood zones: outside them. Land: open and publicly owned (or available to build on). The site must meet all four conditions at once.
4. **In the raster, each cell is 30 m by 30 m. What is the area of the field shown by the filled cells?** — There are 8 filled cells, each 30 × 30 = 900 m², so 8 × 900 = 7,200 m².
5. **What area does a buffer of 1 km around a single well cover? Use π ≈ 3.14.** — π × 1² ≈ 3.14 km².
6. **How did John Snow's map of 1854 work like a GIS, before computers?** — He put two layers of information on one map, the locations of the cholera deaths and the water pumps, and the overlay showed the deaths clustered around one pump, which pointed to the source.
7. **Write a paragraph explaining how a city could use a GIS to prepare for flooding. Name at least three layers and one kind of analysis.** — A good answer names layers such as elevation, streams and drains, flood zones, buildings, roads and where vulnerable people live; describes an overlay that finds buildings and roads inside the zones likely to flood, or a buffer along the streams; and says what the city would do with the result, such as warnings, evacuation routes or new drains.

## Common questions

### What does GIS stand for?

Geographic information system: a computer system that collects, stores, analyzes and displays data tied to locations on the Earth, organized in layers that can be combined.

### What is the difference between vector and raster data?

Vector data are shapes, points, lines and polygons, defined by coordinates. Raster data are a grid of cells, each with one value, such as the color of a satellite image or the height of the ground.

### What is GIS used for?

Planning where to build, managing roads, water and electricity networks, emergency services, farming, protecting nature, studying disease and much more: almost any decision that depends on where things are.

### Is Google Maps a GIS?

It uses many GIS ideas, layers of roads, places and traffic tied to coordinates, and it finds routes. But a full GIS also lets you load your own layers and run analyses such as overlays and buffers.
