# How do you read contour lines?

> Written with AI · [Maps and Geographic Information Systems](https://lessoons.com/en/maps-and-gis) · Grade 10 · 2026-11-12 · https://lessoons.com/en/maps-and-gis/how-do-you-read-contour-lines

To read contour lines, remember that each line joins points of the same height above sea level. Read the numbers to find which way the land rises, and the spacing to judge the slope: lines close together mean a steep slope, lines far apart a gentle one. Closed rings mark a hill, and lines bent into a V pointing uphill mark a valley.

## The topic explained

### What a contour line is

A contour line joins points of equal height above sea level. Imagine slicing a hill horizontally every 100 m and drawing the outline of each slice from above: the outlines are contour lines, and the height between neighboring lines is the contour interval. To read contour lines, first find the interval from the numbers on two neighboring lines, then follow the numbers to see which way the land rises. On Israeli topographic maps the heights are in meters; Mount Meron, the highest peak within the Green Line, reaches 1,204 m.

The sketch shows an imaginary hill with an interval of 100 m. The closed rings rise to a summit of 450 m. Because every line is a height, two lines can never cross, and every point on one line is exactly as high as every other point on it.

### Spacing tells you the slope

The distance between lines is the key to the shape of the land. Where the lines are close together, the land rises many meters over a short distance: a steep slope. Where they are far apart, it rises slowly: a gentle slope. On the hill above, the lines on the west side are about 0.8 to 1.5 km apart and on the east side only about 0.4 to 0.7 km apart, so the east slope is the steep one.

The gradient puts a number on it: height difference divided by horizontal distance. The west slope rises 450 m over 6 km, 75 m per km; the east slope falls 450 m over 3 km, 150 m per km, which is 15 percent. Take the horizontal distance from the map scale, in the same units as the height.

### Drawing a topographic profile

A topographic profile is a cross-section of the land along a line, as if the ground were cut and seen from the side. To draw one: lay a strip of paper along the line A–B, mark every place a contour crosses it with its height, move the strip to a graph with distance across and height up, plot each mark, and join the points with a smooth curve. The profile of the imaginary hill rises gently from A for 6 km to 450 m and drops steeply to B.

Two mistakes are common. Students join the points with straight lines, which makes the land look faceted; and they forget that the summit lies between the last two crossings, a little above the highest contour, never exactly on it unless the height is marked.

### Valleys and ridges

Where contour lines cross a valley they bend into a V that points uphill, toward the higher numbers, because the ground is lower along the stream and the line must go up the valley to find its height. Where they cross a ridge, the V points downhill. To tell the two apart, read the numbers: if the point of the V faces higher lines, it is a valley, and a stream may run down it.

Other marks complete the picture. Most maps draw every fifth line thicker, an index contour, with its height written on it, so you can count up or down from it quickly. A spot height, a dot with a number, gives the exact height of one point, such as a summit between two lines. On the bagrut, describe a landform with all the clues together: the direction the land rises, the spacing of the lines and the shape they make, for example “a steep, narrow valley that runs down to the east, from 300 m to 100 m”.

## Practice: reading contour lines

For 10th grade geography students. Use the sketches, the graph and the numbers printed on the sheet, show your calculations, then check your answers.

1. **The contour interval of the sketch is 100 m and the lowest ring is 100 m. Write the heights of the two rings and the summit marked with question marks, if the summit is 50 m above the highest ring.** — The second ring is 200 m, the fourth ring 400 m, and the summit 400 + 50 = 450 m.
2. **On which side of the hill, west or east, is the slope steeper? How can you tell from the contour lines alone?** — The east side. Its lines are much closer together (about 0.4 to 0.7 km apart, against 0.8 to 1.5 km on the west), so the land rises the same 100 m over a shorter distance.
3. **The profile shows the hill from A to B. Read the height of the summit and its distance from A. What is the gradient of the west slope in meters per km?** — The summit is 450 m high, 6 km from A. The west slope rises 450 ÷ 6 = 75 m per km.
4. **On the east side the 300 m contour crosses A–B 7.73 km from A and the 400 m contour 7.00 km from A. What is the gradient between them, in percent?** — Horizontal distance 7.73 - 7.00 = 0.73 km = 730 m. Gradient 100 ÷ 730 × 100 ≈ 13.7 percent.
5. **The three lines bend into a V that points toward the higher numbers. Is this a valley or a ridge? Which way would water flow?** — A valley, because the V points uphill, toward the higher lines. Water flows down the valley, through the point of each V, from the 300 m line toward the 100 m line.
6. **Fill in the three missing meanings in the table of contour patterns.** — Lines close together: a steep slope. A V pointing uphill: a valley. Closed rings rising: a hilltop.
7. **A map of the Galilee has a contour interval of 20 m. How many contour lines lie above 1,000 m on Mount Meron (1,204 m)?** — Lines at 1,020, 1,040 and so on up to 1,200 m: (1,200 - 1,020) ÷ 20 + 1 = 10 lines.
8. **On a 1:50,000 map, two contour lines 20 m apart are 1 cm apart on the paper. What is the gradient in percent? Would a cyclist call this steep?** — 1 cm on the map is 50,000 cm = 500 m on the ground. Gradient 20 ÷ 500 × 100 = 4 percent: a gentle, steady climb for a cyclist.

## Common questions

### What does it mean when contour lines are close together?

The slope is steep: the land rises the full contour interval over a short horizontal distance. Where the lines almost touch, the map shows a cliff or a very steep valley side.

### What is a contour interval?

It is the difference in height between two neighboring contour lines, printed in the map's legend or found from the numbers on two lines. It is the same everywhere on one map, which is why spacing can be compared.

### Can contour lines cross?

No. Each line is one height, and a point cannot be at two heights. Only at an overhanging cliff can two lines seem to touch, and maps usually draw a cliff symbol there instead.

### How do you tell a hill from a hollow on a contour map?

Read the numbers. If the closed rings rise toward the center, it is a hill. If they fall toward the center, it is a hollow, and many maps mark it with small ticks on the inside of the ring.

### What is the difference between a contour map and a topographic profile?

A contour map shows the land from above, with heights as lines. A topographic profile shows it from the side along one line, as a curve of height against distance, drawn from the contour crossings.
