# What is good manufacturing practice (GMP)?

> Written with AI · [Biotechnology: industrial bioprocessing, from the fermenter to the product](https://lessoons.com/en/industrial-bioprocessing) · Grade 11 · 2026-11-14 · https://lessoons.com/en/industrial-bioprocessing/what-is-good-manufacturing-practice

Good manufacturing practice, GMP, is the set of rules a factory follows so that every batch of a medicine, food or cosmetic is made the same way and to the same quality. It requires written procedures, trained staff, clean controlled rooms, validated processes, a record of every step and testing before release, so that a problem is caught before the product reaches anyone.

## The topic explained

### The same product in every batch

A medicine is not made once. A factory makes it in batches, one tank or one production run at a time, and every batch must be the same: the same amount of active substance, the same purity, free of contamination. Good manufacturing practice, GMP, is the set of rules that makes this happen. It covers medicines, many foods and supplements, cosmetics and medical devices, and its main purpose is to prevent harm to the person who finally uses the product.

GMP asks for clean, controlled rooms; written procedures for every task; trained staff who follow them; equipment that is checked and maintained; processes that are validated, shown to give the right result every time; and records made during production, so the full history of each batch can be traced. In the United States the rules are called current good manufacturing practice, CGMP, and are set out in Title 21 of the Code of Federal Regulations. A common misreading is that GMP is about testing the final product. Testing is only one part: the rules assume quality is built in at every step, because a test of a few samples cannot find every problem in a batch.

### Rules written after disasters

Many of these rules came after tragedies. In 1937 a company in the United States dissolved an antibacterial drug, sulfanilamide, in diethylene glycol, a toxic solvent, and sold it as a syrup without testing it; it is believed to have killed 107 people. The next year Congress passed the Federal Food, Drug, and Cosmetic Act, which required drugs to be shown safe before sale. In the early 1960s thalidomide, a sedative given to pregnant women in many countries, caused severe birth defects, and in 1962 the United States passed the Kefauver-Harris Amendment in response, which speaks of good manufacturing practices covering the quality of both the process and the product. Europe and the World Health Organization have their own GMP guidelines, and each country's health authority inspects factories.

### Quality control and quality assurance

Students often mix up two terms. Quality control, QC, is the laboratory side: it tests samples of raw materials, of the product in the middle of the process and of the finished batch against a specification, a list of limits, such as identity, purity, amount of active substance and, for an injection, sterility. Quality assurance, QA, is the whole system that makes quality happen: it writes and approves procedures, trains staff, audits the factory, investigates every deviation from a procedure and reviews the complete batch record before a batch is released. QC asks whether this batch meets its specification; QA asks whether the process that made it was run correctly. A batch can pass every test and still be held if its record shows a step was skipped.

Records follow strict habits too. Each entry is written when the step is done, signed and dated, and never rewritten afterward: a mistake is crossed out with a single line so the original stays readable, with the reason and a signature beside it. In a biotech plant that makes a protein drug in cells, the rules also cover the cell bank the process starts from, the culture media, the cleaning of tanks between batches, and the air and water in the rooms.

### Releasing a batch: a worked example

Suppose the specification says each batch must contain 95% to 105% of the amount on the label. Five batches are tested and give 99%, 102%, 97%, 93% and 101%. Batches 1, 2, 3 and 5 are within the limits. Batch 4, at 93%, is out of specification: it is not released, and QA opens an investigation to find the cause, such as a weighing error or a failed step, and to decide whether other batches were affected. The logic: a limit is set in advance, and a result outside it is never averaged away.

## Practice: good manufacturing practice

For 11th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

1. **What is the main purpose of good manufacturing practice?** — To make every batch the same and to its quality standard, so that the product does not harm the person who uses it.
2. **Fill in step 4 and explain why the steps before it matter even if the final test passes.** — Quality control tests samples. Testing a few samples cannot find every problem, so quality must be built in at every step by written procedures and records.
3. **Fill in the question that quality control asks and the question that quality assurance asks.** — Quality control: does this batch meet its specification? Quality assurance: was the process that made it run correctly?
4. **What happened in 1937, and which law followed in 1938?** — A syrup of sulfanilamide dissolved in the toxic solvent diethylene glycol killed about a hundred people in the US. The Federal Food, Drug, and Cosmetic Act of 1938 required drugs to be shown safe before sale.
5. **The limits are 95% to 105% of the label. Which batch is out of specification, and what happens to it?** — Batch 4, at 93%. It is not released, and quality assurance investigates the cause and checks whether other batches were affected.
6. **Three samples of one batch give 96.5%, 98.0% and 97.0%. Find the mean and decide whether the batch meets limits of 95% to 105%.** — Mean = (96.5 + 98.0 + 97.0) ÷ 3 ≈ 97.2%. Every result and the mean are within the limits, so the batch meets this specification.
7. **A batch passed all its tests, but its record shows that a cleaning step was skipped. Should it be released? Explain.** — No, not before an investigation. Under GMP the process must be run as written; a skipped step means the batch may be contaminated in ways the tests did not catch.

## Common questions

### What does GMP stand for?

Good manufacturing practice: the rules that make every batch of a medicine, food or cosmetic consistent and safe. In the United States it is called current good manufacturing practice, CGMP.

### What is the difference between QC and QA?

Quality control tests samples against a specification. Quality assurance is the whole system, procedures, training, audits and record review, that makes sure the process itself is run correctly.

### What is a batch record?

The written or electronic record made while a batch is produced, showing every step, the materials used, who did each step and the results. It lets the full history of the batch be traced.

### What does validation mean in GMP?

Showing with evidence that a process or a piece of equipment gives the right result every time it is used, before it is used to make product for sale.

### Does GMP apply to food as well as medicines?

Yes. GMP rules cover medicines, many foods and dietary supplements, cosmetics and medical devices, with stricter requirements where the risk to the user is greater, such as injections.
