# How does a lateral flow test work?

> Written with AI · [Biotechnology: immunology, antibodies, vaccines and diagnostic tests](https://lessoons.com/en/immunology-and-diagnostics) · Grade 12 · 2026-11-13 · https://lessoons.com/en/immunology-and-diagnostics/how-does-a-lateral-flow-test-work

A lateral flow test is a strip that finds one molecule in a few drops of liquid. The sample flows along the strip, picks up antibodies carried on red gold particles, and is caught by a second antibody fixed in the test line. A control line catches the gold antibodies whatever the result, showing that the test ran. Most results appear in about 15 minutes.

## The topic explained

### A whole laboratory on a strip

How does a lateral flow test work? It does in one strip what an ELISA does in several washes. The strip is built of four overlapping pads, and the liquid moves through them by capillary flow, the way water climbs a paper towel, with no pump and no power. First comes the sample pad, which takes up the drops. Next is the conjugate pad, which holds dried antibodies against the target, each attached to a tiny gold nanoparticle. Then a nitrocellulose membrane carries two lines of antibody printed across it, the test line and the control line. Last, a wicking pad soaks up the liquid and keeps it moving in one direction.

A home pregnancy test sold in Britain in 1988 is usually named as the first lateral flow test for use at home; it detects the hormone hCG in urine. The same design now detects viral proteins, drugs and toxins in food. A common misreading is that the strip contains an enzyme, as in ELISA. It does not: the red color is the gold particles themselves, which absorb green light and look ruby red when many collect in one line.

### Why the two lines appear

When the sample reaches the conjugate pad it dissolves the gold antibodies, and any target in it binds to them. The mixture flows on. At the test line a second, capture antibody is fixed to the membrane; it binds a different site on the target. Each target molecule is now held in a sandwich between a fixed antibody and a gold one, and when enough gold builds up the test line turns red. Gold antibodies with no target pass the test line, because the capture antibody has nothing to hold them by.

At the control line the fixed antibody is directed against the gold antibodies themselves, so it catches them whether or not they carry target. A red control line therefore shows that the liquid flowed the whole way and that the reagents work. Students often think the control line tests for the target too. It does not: it would turn red with plain water carrying the gold antibodies, which is exactly why it can vouch for the strip and not for the sample. Some strips carry two or more test lines, each with a capture antibody for a different target, and share one control line.

### Reading the result, and its limits

Both lines mean the target was found; only the control line means it was not found; no control line means the test is invalid, whatever the test line shows, and must be repeated. Most instructions count a faint test line as a line, since its color only means less target, and say to read at a fixed time, because results read too late can mislead. Each test's own instructions decide, and a doctor interprets any medical result.

The speed has a price. Nothing in the strip multiplies the signal, as the enzyme does in ELISA or the copying does in PCR, so a rapid test needs more target before it shows a line. In an invented trial, 200 people carry the target and the test is positive for 160, a sensitivity of 160 ÷ 200 = 80%; of 800 people without it, 792 test negative, a specificity of 792 ÷ 800 = 99%. A negative result can therefore miss a small amount of target. Very high amounts can also fool a sandwich test, the hook effect, by filling both antibodies separately. That is why a rapid test suits an answer needed at once, a place with no laboratory, or the repeated testing of many people; when a small amount matters, a laboratory test is used.

## Practice: how a lateral flow test works

For 12th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

1. **Name the zone marked with a question mark and say what it holds.** — The conjugate pad. It holds dried antibodies against the target, each attached to a gold nanoparticle, which the sample dissolves as it flows through.
2. **What moves the liquid along the strip?** — Capillary flow through the porous pads and membrane, kept going by the wicking pad at the end, which soaks up the liquid. No pump or power is needed.
3. **Name the layer marked with a question mark, and explain why the test line stays white when this layer is missing.** — The target from the sample. Without it, the gold-labeled antibody has nothing to link it to the capture antibody, so it flows past and no gold collects at the test line.
4. **Why does the control line turn red even when the sample has no target?** — The control line carries an antibody against the gold-labeled antibody itself, so it catches the gold antibodies whether or not they carry target.
5. **Read the third window, which shows a test line and no control line. What is the result, and why?** — Invalid. Without a control line there is no evidence that the liquid flowed and the reagents worked, so the test line cannot be trusted and the test is repeated.
6. **In a trial, 50 people carry the target and a rapid test is positive for 45 of them. Calculate the sensitivity and say what it means.** — 45 ÷ 50 = 90%. The test finds the target in 9 of every 10 people who carry it, and misses it in 1 of 10.
7. **Explain why a rapid test is less sensitive than PCR or a laboratory ELISA.** — Nothing in the strip amplifies the signal. PCR copies the target DNA millions of times and ELISA's enzyme makes many colored molecules per antibody, while each gold particle gives only its own color.
8. **A drug test strip uses a competitive format, in which the test line fades when the drug is present. Explain how a strip can work this way.** — The test line holds the drug molecule itself. The gold antibodies bind it there unless drug in the sample has already filled them, so the more drug, the fainter the line.

## Common questions

### Does a faint line on a rapid test count?

Most tests' instructions count any visible test line read within the stated time, because a faint line means only a smaller amount of target. Each test's own leaflet decides, and a doctor interprets a medical result.

### What is the difference between a rapid antigen test and a PCR test?

A rapid antigen test catches a protein of the virus with antibodies on a strip, in minutes and with no machine. PCR copies the virus's genetic material in a laboratory and can detect far smaller amounts.

### Why are the particles in the strip made of gold?

Gold nanoparticles are small, stable, easy to attach antibodies to and strongly colored, so a thin line of them is visible to the eye without any instrument.

### Why must the result be read within a set time?

The time printed in the instructions is when the test was checked. Read much later, as the strip dries, a faint line can appear or change, and the result may mislead.

### What is the hook effect?

At very high target amounts, target fills the gold antibodies and the capture antibodies separately, so few sandwiches form and the test line can be weaker than expected or missing.
