# What are immobilized enzymes?

> Written with AI · [Biotechnology: enzymes, how they work and how industry uses them](https://lessoons.com/en/enzymes) · Grade 11 · 2026-11-12 · https://lessoons.com/en/enzymes/what-are-immobilized-enzymes

Immobilized enzymes are enzymes fixed to a solid support or trapped inside it, such as beads of gel, so they stay in the reactor while the substrate flows past. The same enzyme can then be used again and again, the product comes out free of enzyme, and the process can run continuously. The first industrial use began in Japan in 1969.

## The topic explained

### An enzyme that stays put

An enzyme dissolved in a tank does its work and then leaves with the product. It must be separated out, or it ends up in the product, and the next batch needs fresh enzyme. Immobilized enzymes solve this: the enzyme is fixed to a solid support or trapped inside one, so it stays where it is while the substrate flows past.

A common setup is a column reactor: a tube packed with beads that hold the enzyme. Substrate solution enters at the top, meets the enzyme on its way down, and product leaves at the bottom, with no enzyme in it. The column can run for days or weeks without stopping. Students often think an immobilized enzyme is a different, artificial enzyme. It is the same protein, held in place.

### Four ways to fix an enzyme

In adsorption the enzyme simply sticks to a surface, such as a resin or clay, by weak forces: easy and gentle, but the enzyme can wash off. In covalent binding strong chemical bonds attach it to a support: it does not leak, but the bonds can distort the active site and cost activity. In entrapment the enzyme is caught inside a gel, for example beads of calcium alginate, which let small substrate molecules in and keep the large enzyme from getting out. In cross-linking enzyme molecules are joined to each other into solid particles.

Every method is a trade-off between holding the enzyme firmly and keeping its active site free and reachable.

### Is it worth it?

The advantages are reuse, a product free of enzyme, continuous operation instead of batch after batch, and often greater stability, because the support protects the enzyme. The drawbacks are the cost of immobilizing, some loss of activity, and slower access: substrate has to diffuse into a bead to reach the enzyme.

An invented example shows the arithmetic. Free enzyme for one batch costs 1,000 shekels. Immobilizing the same amount costs 3,000 shekels more, and it lasts 50 batches. The cost per batch is then (1,000 + 3,000) ÷ 50 = 80 shekels, twelve and a half times cheaper.

### Where industry uses it

In 1969 the Japanese company Tanabe Seiyaku ran the first industrial process with an immobilized enzyme, aminoacylase, to produce amino acids continuously. Immobilized glucose isomerase made the large-scale production of high-fructose corn syrup practical. Lactase, which splits lactose into glucose and galactose, is used to make lactose-free milk, and immobilizing it lets one batch of enzyme treat milk again and again.

## Practice: immobilized enzymes

For 11th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your work against the answers.

1. **What comes out at the bottom of the column, and why is there no enzyme in it?** — The product. The enzyme is held in the beads inside the column, so only the solution with the product flows out.
2. **Name the two methods marked with question marks.** — Caught in a gel bead: entrapment. Enzymes linked to each other: cross-linking.
3. **Which method risks the enzyme washing off, and which risks damaging its active site? Explain.** — Adsorption, because the enzyme is held only by weak forces. Covalent binding, because the strong bonds to the support can distort the enzyme's shape, including the active site.
4. **In the example, free enzyme costs 1,000 shekels a batch. Immobilizing costs 3,000 shekels more and lasts 50 batches. What is the cost per batch, and how many times cheaper is it?** — (1,000 + 3,000) ÷ 50 = 80 shekels per batch. 1,000 ÷ 80 = 12.5, so twelve and a half times cheaper.
5. **Why do alginate beads keep the enzyme in but let the substrate through?** — The gel has small pores. Small substrate and product molecules diffuse through them, while the large enzyme molecule is too big to escape.
6. **Give two advantages and two disadvantages of immobilized enzymes.** — Advantages: the enzyme can be reused; the product is free of enzyme; the process can run continuously; the enzyme is often more stable. Disadvantages: the cost of immobilizing; some loss of activity; slower diffusion of substrate to the enzyme.
7. **What does lactase do, and why does a dairy use it?** — Lactase splits lactose into glucose and galactose. A dairy uses it to make lactose-free milk for people who do not digest lactose well.

## Common questions

### Do immobilized enzymes work as well as free ones?

Usually somewhat less per molecule, because the support can block part of the active site and the substrate must diffuse to it. The ability to reuse them for many batches more than makes up for it in many processes.

### Can whole cells be immobilized?

Yes. Living or dead cells can be trapped in alginate or other gels, so all their enzymes work in place. This is useful when a process needs several enzymes or their cofactors.

### What is calcium alginate?

Alginate is a substance from brown seaweed. Dripped into a calcium chloride solution it sets into soft gel beads, trapping whatever was mixed in with it, an enzyme for example.

### Why does a column run continuously?

The enzyme stays in the column while fresh substrate keeps flowing in and product keeps flowing out, so there is no need to stop, empty and refill a tank between batches.

### Is lactose-free milk still milk?

Yes. Its lactose has been split into glucose and galactose, which taste sweeter, while the proteins, fat and minerals of the milk stay the same.
