# How do you measure enzyme activity?

> Written with AI · [Biotechnology: enzymes, how they work and how industry uses them](https://lessoons.com/en/enzymes) · Grade 11 · 2026-11-13 · https://lessoons.com/en/enzymes/how-do-you-measure-enzyme-activity

You measure enzyme activity as a rate: how much product the enzyme makes, or substrate it uses, per minute. A substrate that turns colored is followed in a spectrophotometer, a standard curve turns absorbance into concentration, and the slope of the straight start of the reading gives the initial rate, written in units, micromoles per minute, under stated conditions.

## The topic explained

### Activity is a rate, not an amount

To measure enzyme activity is to ask how fast an enzyme works: how much product it forms, or how much substrate it uses up, in a given time. The standard measure is the enzyme unit, U: the amount of enzyme that converts one micromole of substrate per minute. Because the rate depends on temperature and pH, a unit means something only with its conditions, for example 37 °C and pH 7, and laboratories state them every time.

A common misreading is that more enzyme protein means more activity. A tube of enzyme that was heated or kept badly can hold the same milligrams and almost no activity, because a denatured enzyme has lost the shape of its active site. That is why an enzyme is sold by units, and why industry and research compare specific activity, units per milligram of protein, to judge how pure and how active a preparation is.

### Making the reaction visible

Most reactions cannot be seen, so an assay uses a substrate whose product has a color. The enzyme beta-galactosidase, the lactase that splits milk sugar, also splits a colorless look-alike called ONPG into galactose and o-nitrophenol, which is yellow. The more product, the deeper the yellow.

A spectrophotometer shines light of one wavelength through the tube, here 420 nm, the blue light the yellow product absorbs most, and reports the absorbance. Within its working range, absorbance is proportional to concentration: A = ε c l, where l is the 1 cm width of the cuvette. To turn readings into concentrations, known standards of o-nitrophenol are measured first. In our invented example they give a straight standard curve, A = 0.0046c with c in micromolar, so a reading of 0.69 means c = 0.69 ÷ 0.0046 = 150 µM.

### The initial rate, worked through

The enzyme is added to 1 mL of ONPG at time zero and the absorbance is read every minute: 0, 0.092, 0.184, 0.276, 0.350, 0.400, 0.425. The first readings rise in equal steps, then the curve bends, because substrate runs low and product builds up. Activity is measured as the initial rate, the slope of the straight start: 0.276 ÷ 3 = 0.092 per minute.

Converted with the standard curve, that is 0.092 ÷ 0.0046 = 20 µM per minute. In 1 mL, that is 0.02 micromoles per minute, or 0.02 U. If the tube received 0.01 mg of enzyme, its specific activity is 0.02 ÷ 0.01 = 2 U per mg. Students often divide the last reading by the total time instead, 0.425 ÷ 6, which gives a rate nearly a quarter too low, because the reaction had already slowed.

### Controls make the number trustworthy

Every assay needs controls. A blank with substrate but no enzyme shows how much color appears on its own; it is subtracted from every reading. A tube with boiled enzyme shows that the activity needs the folded protein, not just its presence. Halving the enzyme should halve the initial rate; if it does not, the assay is not measuring the enzyme alone. Temperature and pH are held constant, and the reaction is stopped at the right moment with a sodium carbonate solution, which raises the pH. With these, two laboratories can compare their numbers, and a dairy can check that a batch of lactase for lactose-free milk carries the activity printed on its label, in units per gram, before the batch is used.

## Practice: measuring enzyme activity

For 11th grade biotechnology students. Use the graphs and numbers on the sheet, show every calculation, then check your answers.

1. **Name the product marked with a question mark and explain why the assay uses it.** — o-nitrophenol. It is yellow, so its amount can be measured as absorbance in a spectrophotometer, while the substrate, ONPG, is colorless.
2. **Define one enzyme unit, and explain why its definition must include the temperature and pH.** — The amount of enzyme that converts one micromole of substrate per minute. The rate changes with temperature and pH, so a unit measured under other conditions would be a different amount of enzyme.
3. **Use the standard curve, A = 0.0046c, to find the concentration of a sample with absorbance 0.69.** — c = 0.69 ÷ 0.0046 = 150 µM.
4. **From the readings 0, 0.092, 0.184 and 0.276 at 0, 1, 2 and 3 minutes, calculate the initial rate in absorbance per minute and in µM per minute.** — 0.276 ÷ 3 = 0.092 per minute, and 0.092 ÷ 0.0046 = 20 µM per minute.
5. **Why is the rate taken from the straight start of the curve and not from the last reading?** — At the start the substrate is plentiful and the rate is constant. Later the substrate runs low and the reaction slows, so the last reading divided by the total time underestimates the enzyme's activity.
6. **Fill in the hidden cell: what does the boiled-enzyme tube show?** — That the activity depends on the enzyme's folded shape: boiling denatures it, so the tube should stay almost colorless.
7. **A second preparation gives an initial slope of 0.046 per minute in 1 mL with 0.01 mg of enzyme. Calculate its activity in U and its specific activity, and compare it with the first preparation, 2 U per mg.** — 0.046 ÷ 0.0046 = 10 µM per minute, 0.01 U in 1 mL, and 0.01 ÷ 0.01 = 1 U per mg: half as active per milligram as the first.

## Common questions

### What is the difference between enzyme activity and specific activity?

Activity is how much substrate the enzyme converts per minute, in units. Specific activity divides that by the milligrams of protein, so it shows how active and how pure a preparation is.

### Why is absorbance measured at 420 nm in this assay?

Yellow o-nitrophenol absorbs blue light near 420 nm most strongly, so reading there gives the largest change in absorbance for each step in concentration, the most sensitive measurement.

### What if a sample reads above the top standard?

Above the standards the curve may no longer be straight and the reading cannot be trusted. The sample is diluted, measured again, and the result multiplied by the dilution.

### Can enzyme activity be measured without a color change?

Yes. Some assays follow a product that absorbs ultraviolet light or glows, a gas that is released, or a change in pH. The logic is the same: measure the product over time and take the initial rate.

### What is a katal?

The SI unit of enzyme activity: the amount of enzyme that converts one mole of substrate per second. It is very large, so laboratories usually still use the unit of one micromole per minute.
