# What is bioremediation?

> Written with AI · [Biotechnology: environmental biotechnology, microbes that clean and recover](https://lessoons.com/en/environmental-biotechnology) · Grade 12 · 2026-11-14 · https://lessoons.com/en/environmental-biotechnology/what-is-bioremediation

Bioremediation is the use of living things, mostly bacteria and fungi, to clean up pollution in soil, water or air. Many microbes can use pollutants such as oil as food, breaking them down into carbon dioxide, water and new cells. Engineers speed this up by adding nutrients and oxygen or by adding chosen microbes. It is cheap and gentle, but slow, and it cannot destroy metals.

## The topic explained

### Microbes that eat pollution

Bioremediation is any process that uses a living system to remove pollutants from soil, water or air. Its workers are mostly bacteria and fungi. Many pollutants, such as the hydrocarbons in oil and fuel, are made of carbon and hydrogen, just like the sugars and fats microbes usually eat. Some microbes can use them as a source of carbon and energy, and with oxygen they break them down, in the end, into carbon dioxide, water and more microbial cells.

A good example is the marine bacterium Alcanivorax borkumensis. In clean seawater it is rare. After an oil spill it multiplies and becomes one of the main bacteria in the water, because it uses alkanes, a major part of oil, as its food. A common misreading is that bioremediation makes pollutants disappear in any form. Metals cannot be broken down at all: microbes can only change their chemical form or lock them in place. And many pesticides were designed to resist breakdown.

### What limits the microbes, and how to help

Microbes able to eat a pollutant are often already present, but something holds them back. Oil is rich in carbon but poor in nitrogen and phosphorus, which cells need to grow; Alcanivorax, for example, takes over oily seawater when nitrogen and phosphorus are added. Oxygen is another limit, because it dissolves poorly in water and is used up fast in soil. Temperature, moisture and pH matter too.

Engineers help in two main ways. In biostimulation they add what is missing, nutrients, oxygen or water, so the microbes already on site grow faster. In bioaugmentation they add a culture of chosen microbes known to break down the pollutant, useful when the right microbes are absent. Students often assume adding microbes is always the stronger choice. Added microbes must compete with local ones in a place they are not adapted to, so biostimulation is often tried first.

### In place or dug up

Treatment in situ, in place, leaves the soil where it is: in bioventing, air is drawn through the soil to feed microbes above the water table, and in biosparging air is injected below it. Treatment ex situ first digs up the soil: in landfarming it is spread in a thin layer and turned over now and then to let air in, and in biopiles it is heaped up with pipes that blow air through. Dug-up soil is easier to control, but digging costs money and disturbs the site. The 1989 Exxon Valdez spill, about 41,000 cubic meters of oil in Alaska, taught a lesson: washing beaches with hot water under high pressure also killed microbes that help break oil down.

### Slow and steady: a worked example

The main weakness of bioremediation is speed. Suppose, in a made-up example, soil holds 5,000 mg of hydrocarbons per kg and must reach 500. If breakdown halves the amount every fixed time, the half-life, the soil needs log₂ 10 ≈ 3.32 half-lives. With help the half-life might be 30 days, about 100 days in all; left alone at 120 days, about 400 days. That is why bioremediation suits sites where time is available, and why progress must be measured by sampling, not assumed. Real curves are rarely this neat. The lighter parts of oil usually break down first, while heavy, tar-like parts last much longer, so the fall often slows near the end, and some residue may stay locked in the soil, out of the microbes' reach.

## Practice: what is bioremediation?

For 12th grade biotechnology students. Answer each question from the sheet, show your calculations, then check your answers.

1. **Define bioremediation and name the two main groups of organisms that carry it out.** — The use of living things to remove pollutants from soil, water or air. Mostly bacteria and fungi.
2. **Fill in the products of the aerobic breakdown of oil.** — Carbon dioxide and water; the microbes also build new cells from part of the oil.
3. **Fill in what each method adds, and say which method relies on the microbes already on site.** — Biostimulation adds nutrients and oxygen; bioaugmentation adds chosen microbes. Biostimulation relies on the microbes already there.
4. **Why does adding nitrogen and phosphorus help bacteria break down an oil spill?** — Oil supplies plenty of carbon but almost no nitrogen or phosphorus, which cells need to grow. Adding them lets oil-eating bacteria such as Alcanivorax multiply.
5. **Read the day on which the helped curve reaches 500 mg per kg, and explain the calculation.** — About day 100. From 5,000 to 500 is a factor of 10, which is log₂ 10 ≈ 3.32 half-lives; 3.32 × 30 ≈ 100 days.
6. **In the same made-up example, how much hydrocarbon is left after 60 days with a 30-day half-life?** — Two half-lives: 5,000 ÷ 4 = 1,250 mg per kg.
7. **A soil is polluted with lead. Can bioremediation remove the lead? Explain.** — It cannot break lead down, because metals cannot be degraded. Microbes or plants can only change its chemical form or hold it in place, so other methods are needed to remove it.

## Common questions

### What are examples of bioremediation?

Adding nitrogen and phosphorus to oiled shorelines so oil-eating bacteria grow, landfarming fuel-polluted soil, blowing air through polluted soil in bioventing, and using plants to take up pollutants, called phytoremediation.

### Is bioremediation better than digging the soil up and burning or burying it?

It is usually cheaper and gentler and leaves harmless products, but it is slow, works only on pollutants microbes can break down, and needs monitoring. The choice depends on the pollutant, the site and the time available.

### What is the difference between in situ and ex situ bioremediation?

In situ treats the pollution where it lies, for example by blowing air through the soil. Ex situ first digs the soil up and treats it elsewhere, for example by landfarming or in biopiles.

### Can bioremediation clean up heavy metals?

Not by breaking them down: metals cannot be degraded. Microbes can change a metal's chemical form, making it less mobile or less toxic, and some plants can take metals up so they can be harvested.

### Why is bioremediation slow?

Microbes need the right conditions, oxygen, nitrogen, phosphorus, water and temperature, and the pollutant must be reachable. The process often takes months to years, which is its main drawback.
