# How do you multiply two decimals?

> Written with AI · [Decimals and Percentages](https://lessoons.com/en/decimals-and-percentages) · Grade 6 · 2026-11-18 · https://lessoons.com/en/decimals-and-percentages/how-do-you-multiply-two-decimals

To multiply two decimals, multiply them as whole numbers and then place the point. For 2.4 × 1.5, work out 24 × 15 = 360. The factors have one decimal place each, so the answer has two: 3.60 = 3.6. In 6th grade, an area model and a quick estimate show why the point lands there and catch mistakes.

## The topic explained

### A picture: tenths times tenths

What is 0.3 × 0.4? Take a grid of 100 squares as one whole. Three tenths of the height and four tenths of the width make a block of 3 × 4 = 12 squares.

Twelve squares out of a hundred is 0.12. So 0.3 × 0.4 = 0.12. A tenth of a tenth is a hundredth, which is why the answer has two decimal places.

### The method: whole numbers, then the point

To find 2.4 × 1.5, ignore the points and multiply 24 × 15 = 360. Then count the decimal places in the factors: 2.4 has one, and 1.5 has one, so there are two in total.

The answer needs two decimal places, so 360 becomes 3.60, which is 3.6. This works because each factor was made 10 times too big, so the product is 100 times too big, and we divide it by 100.

### Estimate first, and the effect of a number below one

Before writing the answer, estimate: 2.4 × 1.5 is close to 2 × 2 = 4, so 3.6 is sensible. If you had 36 or 0.36, the estimate would catch the mistake.

Multiplying by a number smaller than one makes the result smaller. For example, 0.5 × 8 = 4, which is half of 8. Multiplying by a number bigger than one, such as 1.5, makes the result bigger.

## Multiplying Decimals: 6th Grade Worksheet

For 6th grade. Estimate first. Then multiply and place the decimal point. Use the grids to help.

1. **The block shows 0.2 × 0.5. How many squares are shaded, and what is the product?** — 10 squares out of 100, so 0.2 × 0.5 = 0.1.
2. **The block shows 0.6 × 0.7. What is the product?** — 6 × 7 = 42 squares out of 100, so 0.6 × 0.7 = 0.42.
3. **Work out 1.2 × 3.1 using the steps.** — 12 × 31 = 372, and there are two decimal places, so 3.72.
4. **What is 0.5 × 30?** — Half of 30 is 15, so 0.5 × 30 = 15.
5. **Estimate 4.9 × 2.1, then find the exact answer.** — About 5 × 2 = 10. Exactly: 49 × 21 = 1029, so 10.29.
6. **Dan divides 7.5 meters of ribbon into 5 equal pieces (an invented story). How long is each piece?** — 7.5 ÷ 5 = 1.5 meters.

## Common questions

### Where does the decimal point go when I multiply decimals?

Count the decimal places in both factors and add them. The answer has that many places, counted from the right of the whole-number product.

### Why is the answer sometimes smaller than the numbers I multiplied?

Because a factor less than one takes only a part of the other number. For example, 0.5 × 8 is half of 8, which is 4.

### Do I need to line up the points when I multiply, as in adding?

No. Lining up the points is for adding and subtracting. In multiplication, you multiply the digits first and place the point at the end.

### How can I practice at home?

Use prices and measurements, such as the cost of 1.5 kilograms at a price per kilogram, and always estimate before calculating.
