# What is a bioreactor?

> Written with AI · [Biotechnology: the toolbox and what it is used for](https://lessoons.com/en/biotechnology-tools) · Grade 12 · 2026-11-11 · https://lessoons.com/en/biotechnology-tools/what-is-a-bioreactor

A bioreactor is a closed, sterile vessel in which living cells, such as bacteria, yeast or animal cells, grow and make a product: a medicine, an enzyme, an acid or a vaccine. It holds the conditions the cells need steady, the temperature, the pH, the oxygen and the mixing, and keeps every other microbe out.

## The topic explained

### A tank where cells do the work

A bioreactor (“ביוריאקטור”) is a vessel that keeps living cells in exactly the conditions they need while they make something useful. In a school laboratory it may be a flask on a shaker; in a factory it is a steel tank of thousands of liters. Bacteria make insulin, the fungus Aspergillus niger makes the citric acid in soft drinks, the mold Penicillium makes penicillin, and most medicines made of protein, antibodies among them, come from animal cells, mainly a line called CHO cells.

In industry this work is called fermentation. In a biology lesson the word means a way of breaking down sugar without oxygen; in industry it is used loosely for any large-scale production by living cells, including cells that need plenty of air. Mixing up the two meanings is a common mistake in exam answers.

### What the bioreactor controls

Growing cells release heat, so a cooling jacket or coils hold the temperature, 37 °C for animal cells. Their waste changes the acidity, so a pH probe measures it and the controller adds acid or base. Oxygen dissolves poorly in water, so air is pushed through a sparger at the bottom, and an impeller turned by a motor breaks up the bubbles and keeps the cells and nutrients evenly mixed. Before the run, the vessel, the medium and the air lines are sterilized.

Students often think a big tank is just a small one scaled up. It is harder: oxygen has further to travel and heat is harder to remove. Sterility matters more too, because one contaminating microbe that grows faster than the production cells can take over a huge batch, and all of it is lost.

### The growth curve of a batch

Cells put into fresh medium go through four phases. In the lag phase they adapt, making enzymes, and hardly divide. In the log phase they divide at a steady rate, so the number doubles again and again: E. coli can double in as little as 20 minutes, and 1,000 cells doubling every 20 minutes for three hours, nine doublings, become 512,000. In the stationary phase food runs low and waste builds up, and new cells only replace dead ones. In the death phase more cells die than divide.

The phase matters for the product. Ethanol and citric acid, which cells make as part of normal growth, come mostly in the log phase; penicillin, which the mold makes when growth slows, comes in the stationary phase.

The curve is drawn with the number of cells on a logarithmic scale, so steady doubling appears as a straight, rising line. On an ordinary scale the same log phase would look like a curve that shoots upward, and the lag phase would be squashed flat against the axis.

### Three ways to run it, and how penicillin scaled up

In a batch all the nutrients go in at the start. In a fed-batch they are fed in during the run, keeping the cells in production longer. In continuous culture fresh medium flows in as used medium flows out. On March 1, 1944 the company Pfizer opened the first commercial plant to make penicillin in deep, stirred, aerated tanks, in Brooklyn, using a medium improved at a US government laboratory in Peoria. After the run the product is separated from the cells and purified; for insulin, made inside the cells, they are first broken open.

## Practice: bioreactors and the growth of a culture

For 12th grade biotechnology students. Answer each question from the sheet, then check your work against the answers.

1. **Name four conditions a bioreactor keeps steady, and the part that controls each.** — Temperature: the cooling jacket or coils. pH: the pH probe with additions of acid or base. Oxygen: air through the sparger. Mixing: the impeller turned by the motor. Sterility is also kept, by sterilizing everything before the run.
2. **Why does a bioreactor need cooling rather than only heating?** — Growing cells release heat as they break down food. In a large tank this heat builds up, so it has to be removed to keep the temperature steady.
3. **Name phases A, B, C and D of the growth curve and explain what happens in each.** — A: lag, the cells adapt and hardly divide. B: log, steady doubling. C: stationary, food runs low and waste builds up, births equal deaths. D: death, more cells die than divide.
4. **A culture starts with 1,000 bacteria that double every 20 minutes. How many are there after three hours, if they stay in the log phase?** — Three hours is 180 minutes, nine doublings: 1,000 × 2⁹ = 1,000 × 512 = 512,000 bacteria.
5. **Fill in the table: how are nutrients added in each way of running a bioreactor?** — Batch: all the nutrients at the start. Fed-batch: nutrients fed in during the run. Continuous: fresh medium flows in while used medium flows out, all the time.
6. **Penicillin is made mainly in the stationary phase. Which way of running the bioreactor helps keep the mold producing longer, and why?** — Fed-batch. Feeding small amounts of nutrients during the run keeps the culture alive and producing in the slow-growth phase for longer, without a burst of fast growth.
7. **Explain why sterility becomes more important as the bioreactor gets larger.** — A larger batch is worth more and runs longer, and a single contaminating microbe that grows faster than the production cells can take over the whole volume. If it does, the whole batch is lost.
8. **A student writes: fermentation means growing cells without oxygen. Is this right for a factory making penicillin? Explain.** — Not for a factory. In biology fermentation is breaking down sugar without oxygen, but in industry the word means large-scale production by living cells, and the penicillin mold needs plenty of air.

## Common questions

### What is the difference between a bioreactor and a fermenter?

In everyday industrial use they mean the same thing. Fermenter is the older word, used mostly for tanks of bacteria, yeast or fungi; bioreactor is the wider word and also covers vessels for animal and plant cells.

### What products are made in bioreactors?

Antibiotics such as penicillin, citric acid, enzymes for food and washing powders, insulin and other protein medicines, vaccines, monoclonal antibodies, and ethanol. Beer, wine and yogurt are made by the same kind of process, on a simpler scale.

### Why are animal cells harder to grow than bacteria?

Animal cells divide far more slowly, need a richer medium, are easily damaged by vigorous stirring and bubbles, and are quickly overtaken by any bacterial contamination. In return they make complex proteins, such as antibodies, in the form the human body needs.

### How big is an industrial bioreactor?

Sizes run from a few liters in a laboratory to many cubic metres in a factory. Steel tanks are cleaned and sterilized between runs; for smaller runs of medicines, many factories now also use single-use plastic bags.

### What is downstream processing?

Everything after the cells have done their work: separating the cells from the liquid, breaking them open if the product is inside, then purifying, testing and packing the product. For medicines it is often the longest and most expensive part.
