# How does PCR work?

> Written with AI · [Biotechnology: the toolbox and what it is used for](https://lessoons.com/en/biotechnology-tools) · Grade 12 · 2026-11-11 · https://lessoons.com/en/biotechnology-tools/how-does-pcr-work

PCR (polymerase chain reaction) copies one chosen stretch of DNA millions of times in a tube. Each cycle has three temperatures: about 95 °C separates the two strands, about 55 °C lets two short primers bind, and 72 °C lets a heat-stable polymerase build new strands. Every cycle doubles the copies, so 30 cycles turn one molecule into about a billion.

## The topic explained

### A copying machine for one piece of DNA

The polymerase chain reaction, PCR (“תגובת שרשרת של פולימראז”), was invented by Kary Mullis in 1983 and earned him a share of the 1993 Nobel Prize in Chemistry. To see how it works, look at what goes into the tube: the template, the DNA that contains the region you want; two primers, short single strands of about 20 letters that match the two ends of that region; free nucleotides, the building blocks; a heat-stable DNA polymerase; and a buffer with magnesium ions, which the enzyme needs. A machine called a thermal cycler changes the temperature of the tube again and again.

A common misreading is that PCR copies all the DNA in the sample. It copies only the stretch between the two primers. Change the primers and you copy a different region.

### One cycle, three temperatures

Denaturation, at about 94 to 98 °C for 20 to 30 seconds: the hydrogen bonds between the bases break, and the double helix comes apart into two single strands. Annealing, at about 50 to 65 °C: the tube is cooled so that each primer can bind to its matching sequence. Extension, at about 72 °C: the polymerase adds nucleotides to the end of each primer, building a new strand complementary to the template.

The enzyme has to survive the heat of every denaturation. Taq polymerase comes from Thermus aquaticus, a bacterium that Thomas Brock and Hudson Freeze found in 1969 in a hot spring in Yellowstone National Park; it works best at about 75 to 80 °C and is not destroyed at 95 °C. Before it was used, fresh enzyme had to be added after every cycle. Students often think the annealing step is too cool to matter: if the temperature is too low, primers stick to near-matches too, and the wrong pieces are copied.

### Doubling, cycle after cycle

Each new strand becomes a template in the next cycle, so the number of copies doubles every time. Starting from one molecule, after n cycles there are 2ⁿ copies: 8 after 3 cycles, 1,024 after 10, and after 30 cycles 2³⁰ = 1,073,741,824, about a billion. That is why a run of 25 to 35 cycles, two or three hours in the machine, can copy a trace of DNA into enough to see on a gel.

The doubling is the ideal. In a real tube every cycle is a little less than perfect, and after many cycles the primers and nucleotides run low and the reaction levels off.

### What PCR is used for, and why a clean bench matters

PCR finds a virus in a swab, identifies a person from a trace left at a crime scene, and checks whether a bacterial colony carries an inserted gene. RT-PCR begins with reverse transcriptase, an enzyme that copies RNA into DNA, so it can detect RNA viruses such as SARS-CoV-2. Because a single stray molecule is copied as readily as the sample, laboratories run a negative control, a tube with everything except the template, and keep the preparation away from finished reactions.

Read a result for what it is. A positive PCR shows that the target sequence was in the tube; on its own it does not say how much there was. Real-time PCR, also called quantitative PCR, adds a fluorescent dye and measures the product after every cycle: the earlier the signal crosses a set threshold, the more target there was at the start.

## Practice: PCR, its steps and its arithmetic

For 12th grade biotechnology students. Answer each question from the sheet, then check your work against the answers.

1. **List the five things that go into a PCR tube and the job of each.** — Template DNA (contains the target region); two primers (bind to the ends of the target and mark where copying starts); free nucleotides (building blocks); heat-stable DNA polymerase (builds the new strands); buffer with magnesium ions (conditions the enzyme needs).
2. **Name steps A, B and C of the cycle, give a typical temperature for each and say what happens.** — A: denaturation, about 95 °C, the strands separate. B: annealing, about 55 °C, the primers bind. C: extension, 72 °C, the polymerase builds new strands from the primers.
3. **Why is Taq polymerase used in PCR rather than a polymerase from a human cell?** — Taq comes from a hot-spring bacterium and is not destroyed at 95 °C, so it survives every denaturation step. A human polymerase would be destroyed in the first cycle.
4. **Fill in the table: how many copies does one starting molecule give after 3, 10 and 30 cycles, if every cycle doubles?** — 3 cycles: 8. 10 cycles: 1,024. 30 cycles: 1,073,741,824, about a billion.
5. **A sample starts with 50 copies of the target. How many copies are there after 20 ideal cycles?** — 50 × 2²⁰ = 50 × 1,048,576 = 52,428,800 copies.
6. **What decides which region of the DNA is copied in PCR?** — The two primers. Each binds to one end of the region, and the polymerase copies only the stretch between them.
7. **In a test, the negative control tube, which has no template, shows a product. What does this mean, and what should the laboratory do?** — The reagents or the tube were contaminated with DNA, so the results of the whole run cannot be trusted. The laboratory should discard the run, find the source, and repeat with fresh reagents.
8. **A student sets the annealing temperature at 35 °C. Predict what will go wrong and explain.** — At such a low temperature the primers also bind to sequences that match only partly, so extra, wrong pieces of DNA are copied along with the target. A good answer links the temperature to how exactly the primers must match.

## Common questions

### What does PCR stand for?

PCR stands for polymerase chain reaction. Polymerase is the enzyme that builds new DNA strands, and chain reaction describes how the products of each cycle become the templates of the next, so the number of copies grows by doubling.

### What is the difference between PCR and RT-PCR?

PCR copies DNA. RT-PCR starts with RNA: the enzyme reverse transcriptase first copies the RNA into DNA, and ordinary PCR then copies that. It is used to detect RNA viruses, such as the virus that causes COVID-19.

### How long does PCR take?

One cycle takes from about one to a few minutes, and a run of 25 to 35 cycles usually takes one to three hours, depending on the machine, the enzyme and the length of the region being copied.

### Why are the primers needed?

DNA polymerase cannot start a new strand from nothing; it can only add nucleotides to an existing short strand. The primers give it that starting point, and because they match the ends of the target, they choose which region is copied.

### How is PCR different from DNA replication in a cell?

In a cell, enzymes unwind the helix and copy the whole genome once per division. In PCR, heat separates the strands, synthetic primers start the copying, and only one short region is copied, again and again.
